I'm sorry if this appears twice.

I have a Louet David loom (I think). The seller leveled the loom when it was delivered. It has been moved, old house, the floors are uneven in every direction. How crucial is a level loom for weaving? Should I be really careful, or can I know that people have been weaving on all sorts of floor surfaces for centuries and just go forth? If it needs to be leveled, how is that done?

Comments

kerstinfroberg

I know lots of ppl will disagree - but I'm with you here: weavers have been using all sorts of looms, on all sorts of floors, for not only centuries but millenias (is that a word?)... If you don't have any problems, then there *are* no problems. My loom was level, but sort-of distorted (sorry - don't know the rights words here), and I had no problems until I tried a rug. I just added the blue band seen here, and forgot about the problem... which has not surfaced since.

Have fun!

laurafry

As usual with weaving, the answer is 'it depends'.  As Kerstin says, if you aren't having a problem, well, no problem.  But some looms will misbehave if they go out of 'square', which can happen on a floor that isn't level.  If your loom has shafts that travel in channels, they might bind up.  But as I recall Louet shafts are more free swinging, so to speak.  The other place to check for problems is the beater.  So long as you are getting a straight fell line there shouldn't be a problem.  I'd try a test warp and see how things go.  If necessary you can shim under the loom feet to true it up.

cheers,

Laura

karentiede

We carefully leveled my Newcomb Studio when we set it up, and then a few rows of weaving Bam! bam! bam! and it moved off the shims and I decided to heck with it.

I have it braced against two different walls and use a temple for rugs and thus far, I, and the loom, appear to be doing ok.

That said, my shafts swing freely and don't have channels.  And sometimes the cords jump clear of the pulleys, but I don't think it's a leveling problem.

Submitted by Cathryn on