My 36" Leclerc Mira CB loom is wonderful, *except* for the squeaking when I'm weaving! It appears to come from the wooden rollers - both the smaller ones that separate the individual shafts, as well as the larger top roller that separates the pairs, 1-2 from 3-4. This loom has nylon pulley thingies at the ends of each roller, with nylon cords that fit into the pulley grooves; it seems as if the squeaking comes from the friction between the wood rollers and the nylon pulleys...at least, that's my guess - I can't tell for sure. My husband wants to put bearings of some sort on these rollers (don't ask me exactly what he's envisioning, cuz I don't know). Before we go to that trouble, is there something we can lubricate that won't compromise the weaving action, but might quiet the rollers?

The noise is kinda getting to me...

Thank you all!

Julie in Montana

Comments

SallyE (not verified)

Before you go to that trouble, you might get some silicone spray at the hardware store and put it everywhere things move or rub.   The graphite stuff is great too, but might drop down on your weaving and make black marks.

 

Joanne Hall

ordinary candle wax works.  White is best as it will not leave a color on the wood.

I have had these looms in the studio and they never squeaked, but they were always new looms.

Joanne

ArtistInNature

Ok, HUGE thank you to SallyE! we partially unscrewed the screws that were holding the nylon pulley/roller things at the end of each wooden roller (the two small lower ones and the big upper one), sprayed the screws with silicone spray, and reinserted them.

Result: one blissfully *quiet* loom. Ahhhhh....*now* I can enjoy this slow cloth I'm working on! thank you, Joanne, for the candle-wax tip too. My Mira is at least 20 years old, best guess. But now it sounds like new :-).

Michael White

Sorry I didn't reply to this sooner. If you ever plan on refinishing your loom DO NOT EVER USE SILICONE SPRAY on a loom. If you do you may not be able to refinish it. The silicone will cause fish eyes and other problems. candle wax will do the same job. Glad you have a "quite" loom.

Michael

ArtistInNature

Thank you for the warning on the spray, Michael! zowie. I'm not planning on refinishing the loom (it looks fine), and we only sprayed the screws - carefully, with newspaper under each screw to ensure no overspray landed anywhere else...

ReedGuy

Minwax furniture finishing wax works wonders. ;D

Submitted by ArtistInNature on