I am a new weaver on my second project and am experiencing the same problem as on my first project: the weft curves up towards the loom on the edges.  This time it is only doing it on the right side so I thought that perhaps I had too much draw-in on that side and it was tightening the warp.  I re-spread the warp with cotton strips and began weaving again.  The weft is starting to curve up again.  How do I fix this problem?

Comments

Diane Blais-Lu… (not verified)

When your warp "smiles", or curves up at the edges, it is because the tension on those threads are lighter. It often happens due to the draw-in that inevitably occurs.

The solution is to weight the threads at each edge. You will probably need a weight of at least a few ounces. Fishing weight work, as do coins in a small jar or film canister.

One weaving book I read recently by Peggy Osterkamp, said that she always winds and weights her selvedges seperately because of this.

Sara von Tresckow

Don't get in the habit of weighting threads that are loose. Instead, pull lthem tighter at the fell line, best between pieces, pinning them securely. That way, the tension will remain firm until the end of the warp.

If you weight threads, they get looser and looser and are a problem all the way to the end.

Also use a temple - one of the main reasons to do so is to prevent this smiling.

Of course, your tension issue could be due to your newness to weaving and you mnay have held the warp chain more firmly on one side while beaming. If this is the case, just finish as best you can and when you warp again, pay careful attention to your beaming.

laurafry

The challenge with tension and selvedges is that because there is more than one reason for this to happen, there is more than one answer.  I summarized the usual suspects in a recent blog post

http://laurasloom.blogspot.ca/search/label/selvedges

From how the warp is beamed through to how bobbins are wound - all can affect selvedges.  The problem with new weavers is that sometimes there is more than one issue involved.  It's a learning process that may take several warps as you fine tune what you are doing and see how small changes can affect the results.

Welcome to the wonderful world of weaving.  :)

cheers,

Laura

maurak

Sara, I don't understand your method for tensioning end warp threads. Can you explain more in depth? Thanks! Maura

Joanne Hall

As you continue to weave, your tension problems will diminish.  Another suggestion is to make your warp bouts smaller.  If you wind a 30 inch wide warp, wind it in four or more bouts, tying each and taking each off before winding the next.  And don't wind with the thread tight.  Both these will give you bouts where the ends are all the same length.  And having more bouts makes the warp go on with more even tension.

If this is not the source of the problem, then just get a temple and it will prevent the selvage problems you have.  Read about selvages on our Weaving FAQ:

http://glimakrausa.com/faq.html

Joanne

JacRoyce

I always add floating selvedges after I finish tying on the rest of the warp.

Depending upon the design, I either 'convert' the outside warp threads to selvedge or add another on each edge. Don't beam these with the rest of the warp. Sley them separately, and hang them over the warp beam and off the back of the loom. Weight them individually—I tie about 12" of thrum with heavy beads hanging from it around the selvedge with a slip knot so I can slide it further whenever necessary.

You can strengthen the selvedges further by doubling them and/or sleying them closer than the rest of the warp.

I'll always be grateful to the weaver who taught me about floating selvedges!

Jac 

Sara von Tresckow

I don't do anything special with selvedge threads other than hold the warp chain(s) firmly, with even tension all the way across. I stand as far away from the loom as possible to avoid having a definite spreading of the warp chain just before it beams on. If you think about it, if the warp chain spreads a lot just before it winds on or goes into the raddle, the edges will have a different tension than those in the middle.

I do use  pretty much countershed looms and always warp as it is called here "back to front" - or in Europe "warping a loom".

In the beginning, you may have a few issues holding the chains so that the tension is even - just having a dominant hand can make one side tighter than the other.

If you get some threads going slack, nurse them along. I was working on some linen runners yesterday and by advancing in small increments, the few threads that occasionally showed a bit of slack were behaving the same as the rest - doing nothing more than throwing the shuttle carefully to avoid catching or skipping threads. After less than an inch of weaving there wasn't any noticeable slack any more.

Erica

I have learned a few new tricks as well! This is why I often read through threads that don't necessarily apply to me. Every question asked here allows us all to learn new things.

Cheers,

Erica

Joanne Hall

are becoming a fad.  I am sorry if that sounds strange for you to hear.  But it simply is a way to avoid using a temple, which is a traditional weaving tool.  Peter Collingwood often answered this type of question by telling us that there is a stained glass window in Europe from the 12th century, clearly showing a temple in use on a loom.

Weighted selvages and floating selvages were never recommended in the past (I have been weaving a long time), but you see them recommended all the time now.  I do not weight selvages on warps in my studio, even with beginners weaving on my looms. However, we always us a temple.

I can understand that if one is weaving a non stretchy warp on a small jack loom or a table loom (which is a jack loom), a weighted selvage can make up for the fact that one needs to weave with the tension a bit loose.  A jack loom does not work very well with the warp tightened too tightly.   But even with a small jack loom, one should not normally need to weight the selvage threads.  A temple solves the problem.

Weighted selvage threads are usually a recommendation from someone who decides not to use a temple.  For it is the temple that prevents the draw-in. The temple makes the weaving easier, mainly because selvages no longer are a problem.

A floating selvage is used when the selvage thread is consistently not caught by the weft.  With a goose eye or twill threading, where the treadling reverses periodically, they can be helpful.  And on a double weave rug, where the selvage thread is not caught half of the time, or when alternating two shuttles, one might decide to use one, but there are few other examples. 

With twill, if one selvage thread does not get caught, just leave it.  It will stay there and not cause any problems.  If it should suddenly be caught into the cloth, it will  alert you to the fact that you have made a treadling error.  So, it can actually catch your mistakes before you see them.

A floating selvage does not have any other purpose than to catch the last selvage warp thread.  

Joanne

Kade1301

I think they are a better invention than sliced bread ;)  Slicing bread is easy, weaving varying twill patterns and consistently catching the first and last thread (I weave with big enough yarns that I don't want floats longer than 3 threads max.) is not. It's also nice to be able to do basket weave with one shuttle with one yarn wound onto it. I find floating selvedges very easy to handle - much easier than wrapping the shuttle around a selvedge thread in a heddle that goes in the wrong direction...

On the other hand, I also like my temples and have bought or built a full set for all possible weaving widths ;)

Sara von Tresckow

You are describing the two places where floating selvedges are recommended. For most other weaves, they are a distraction and not necessary.

calebsb

Is this happening at the biginning of the project, or in the middle?  If it's the beginning, a warping/setup error is likely, but it may get better as you weave.  If it's the middle, it's most likely something a temple would prevent.

btw, if you do use weights to take up slack, you will have to pick them up each time you advance if you don't want the slack to increase, as they will keep pulling hard while the rest of the warp is off tension.  The same goes for putting sticks and wedges on the back beam under the warp.  From personal experience I can say this is a losing game.  

JacRoyce

It almost seems like I offended some folks by even mentioning floating selvedges. I'm glad that at least one other person likes them. I do usually use a jack loom, so I guess I can be forgiven... Anyhow, I do not find them distracting or troublesome in any way, and am very pleased with the results. And, weighting them off the back of the loom is no bigger deal than weighting a new warp thread off the back of the loom if one breaks.

As long as I'm inspiring a "there's only one right way to do it" argument, I might as well go all the way. I also warp from front-to-back.

...we need both yin and yang to keep the inspirations flowing. 

Cheerfully Contrarian,

Jac

Joanne Hall

do serve a purpose, but I am finding that weavers use them when they are not needed, thinking that it will solve problems, like draw-in.  Sometimes it is hard for a beginning weaver to find the solution to a problem.  And I do know that many weavers have found ways around not using a temple. 

But the temple is a traditional tool that should not be ignored.  If sales of equipment is an indication of something happening, then weavers are re-discovering the temple.  There now are instructors who require that they be used in their classes. 

Joanne

Sara von Tresckow

Nobody is offended.

Just because you've been given some advice that could take you beyond the beginner's realm does not mean that anyone is being absolute here.

However, in the simple mechanics of beginning weaving, there are some things that are sort of universal. Learning an effective method way of warping the loom with even tension beats any workarounds that one chooses to present. It is too bad when those starting out continue to propagate half-truths and start this "Contrarian" thing when challenged by those with decades of experience.

JacRoyce

Ms. von Tresckow,

Just to set the record straight. I warp my looms with even tension. I'm not opposed to using a temple. I don't consider adding a floating selvedge to be a "workaround," although in the early years (when a well-respected and well-known teacher whose name I will leave out of this suggested them), I found it quite helpful. I now use them for design and strength purposes. I don't "propagate half-truths." I just passed along something that helped me.

It's a little bit weird to be "challenged" for simply trying to lighten things up a bit. You write that you're "not offended" and then go on to belittle weavers who work differently than you do. What makes you so sure that I'm just "starting out" and that you have decades more experience than I do? ...but perhaps you just meant to be emphatic instead of rude. 

At any rate, I hope you have a beautiful day and are very happy with your current projects.

Peace.

 

 

mrdubyah (not verified)

You can make a poor man's temple with a pair of bulldog clamps, a couple of weights, and a bit of stout cord.  Tie the weights to the clamps with about two feet of cord each.  Then, tie a cord from front beam to back beam on the right and left edges of the loom.  Clamp the clamp onto the selvedge and toss the weights over the side cords.  Voila!  No more smiling fell line. 

"When the fell line smiles, the weaver usually won't." (unknown)

endorph

I love your quote. I am getting ready to weave some towels and decided this will be a good project to start using a temple on. So in the morning it is off to Fiber Crafts to make a purchase. Thank you Joanne, Sara, JacRoyce, mrdubyah, Laura and everyone else for all the suggestions and advice. Discussions like this one help to open up many avenues for more learning for us newbies. I appreciate the years of wisdom on Weavo. . . Tina
Submitted by MarcyP on