I have been looking for patterns for summer scarves and may have settled on a huck lace. I am not a fan of lace, so I was hoping to do it with a thicker yarn than the pattern calls for. I have seen several lace projects done with 8/2 tencel and thought that I might try that. However, I dont have tencel in my stash and considering the huge amount of rayon that I have, I cant justify another purchase. So, I was thinking that I could substitute what I have - it is a yarn from silk city fibers called "slinky". It is a shiny, unfortunately slippery, beautiful rayon. When I looked at the details for 8/2 tencel on webs or yarn barn, I found that there are 30 wpi and 3300 or so ypp. When I use my wpi tool with slinky, I also get 30 wpi, but the yarn is only 1600 or so ypp. Can this be? And, if this yarn is equivalent in size to 8/2 tencel, can I use something so slippery for huck lace? I have only used tencel once and dont remember how slippery it is compared to this stuff. I am planning on a sample, but if someone tells me that it definitely wont work, I will spend my time on something more productive. Thanks. Gail

Comments

laurafry

I have worked with slinky and it is extremely slippery. It will need super doper control. It does not hold knots well. It needs to be set much more densely than a yarn of the same grist and during wet finishing a hard press is somewhat helpful in giving it more stability. After using it once for warp I decided it was weft only. I just don't like to fight that much with a yarn. Cheers Laura

gailc

Thanks, Laura. I was thinking that this will be a little difficult as warp, and if someone with much more experience than I deems it only suitable for weft, I will not argue. I think I will try perle cotton warp, slinky weft. I have tons of this stuff - I was sucked in by how shiny it looks and how cool it feels. I am sure that you saved me from some severe aggravation. Gail

laurafry

It should work fine on a perle cotton warp.  :)  Be careful how you beat it in - it will slide just fine!

cheers,

Laura

Bonnie Inouye (not verified)

I had a similar rayon years ago and found that it was a dense yarn. A shawl made with only this yarn was very heavy. This might explain your numbers- fewer yards per pound because a yard of this kind of yarn is heavier than a yard of another yarn the same thickness.

Bonnie

gailc

Yes, Bonnie, it does seem dense compared to what I remember of the tencel. I was kind of surprised by this because they are both regenerated cellulose, so it seems strange that one is so much denser.

gailc

Laura, does being careful how I beat mean I should be beating it in hard to keep it from slipping out, or beating softly to keep from packing in too much? This yarn looks so beautiful on the cone, I want to have it look as good in the cloth. Thanks. Gail

laurafry

If you beat it in hard it might become weft emphasis and you'll lose the effect of the warp.  Plus, because it is so dense the fabric will become very heavy.  I'd go for a more balanced effect, especially as you are wanting to do a lace weave.  To really get the effect of the lace a balanced weave is 'ideal'.

cheers,

Laura

laurafry

In other words, you might have to do a bit of sampling, including the wet finishing, to find out the quality of the cloth once done.

cheers,

Laura

lkautio (not verified)

Lace really depends on a more open plain weave sett to get the lace effect.  With a yarn this slippery (sounds similar to Webs Susi, which I have tried), it can look fine as you weave and then slip unpleasantly as it goes over the breast beam.

An interesting thing to try with a lace weave involves using two yarns of different reflectivity. You will get a very interesting effect with huck if you alternate these two yarns in warp and weft. Because there is an odd number of threads in a huck block, in adjacent blocks the floats will be on different yarns. Alternating your slick yarn with a cotton will help a lot with the slippage problems. Or, you can put the shiny yarn on the pattern threads in warp  and weft and cotton on the tie-downs and tabby.  Different effects, but both useful and fun to try.

Laurie Autio, who loves lace

gailc

I put extra warp on my cotton scarf project so that I could sample with some of the slinky as weft. I kind of wish I didnt buy so much of this. I now have a few more questions about weaving with this. My warp is 5/2 perle cotton. When I started my sample weaving with slinky, it was very difficult to get the first few rows tight. More importantly, if using something so slippery as weft, how do you make sure that your hemstitiching will stay secure? I had to keep the yarn taut all the time, and then wasnt sure how to secure it at the end. And, when joining a new weft yarn, is there anything different that must be done when working with slinky? I am starting to wonder if this yarn is usable at all. It sure is pretty, though.

Guiding Myth (not verified)

Slinky is a yarn I use regularly as warp for some scarves I sell.  To use it as warp you need to use a dummy warp or as Laura mentioned you will be fighting with it the whole time.

When I hemstitch it I keep the thread taut.  To secure it at the end I sew it up the selvage (so it doesn't show) for about 1/2" and down again and then pull the thread through the gathering loop.  If you don't want to include the thread in the fringe you can thread it through the bottom edge of the scarf following the path of the last thread - the hemstitching will hide it.

Joining a new weft yarn should be done at the selvage and overlap it about 2X what you would normally do.

Bonnie is right about it being heavy - too heavy for a shawl but it is a nice weight for a scarf, I think.  I have never used it for Huck lace.  Because you are weaving lace don't beat it in too tight - balance as Laura recommended is best.  

Have fun with it.  

Stephanie S

gailc

Thanks, Stephanie. I think I have given up on the lace idea and my sample was a twill. It looks wonderful, but I need some practice using this yarn. I really do want to try it for warp. I have never used a dummy warp and am a little confused as to how it will help. I warp back to front, so I wouldnt have knots at the back apron rod. Wouldnt that work better than trying to keep knots in the slinky when attaching to the dummy warp? Thanks again for your advice. Gail
Submitted by gailc on