I'm looking for some tips on reducing or eliminating hem flare on weaves that have a lot of draw-in compared to plain weave.  It's not too bad on twills (but still present), but on something like waffle weave (see below picture pre-hemming for all but the top towel), it can be crazy!  I even used a much finer yarn for the hems of these towels.

I've checked several project articles in books and in Handwoven magazine, and no one seems to address this.  Help! I don't mind using the flared towels, but they look kinda funny for me to give them as gifts.

Carrie.

 

Comments

TinaHilton (not verified)

I just hem-stitched on the loom and cut a very short fringe (1/2" to 3/4").  It's still looking fine after 3 years. 

tien (not verified)

I'd try switching your hem to something that has close to the same take-up, or even using the same structure for the hem.  A 2/2 basketweave, for example, or a 2/2 twill, will flare out less.  You don't *have* to use plainweave for the hem!

Tien

Ellen (not verified)

If you use the same waffle weave for the hems, I think you would get ,not a flare, but a bulky hem. It might look a little bettter. But maybe the twill would help. I did a waffle weave not long ago and did a plain weave hem with a finer thread, but did not have the flare problem. I wonder if the type of yarn makes any difference? 

Submitted by Anonymous (not verified) on