Hi all -

I've got the Tubular Spectrum Plus kit from Lunatic Fringe and I want to do something that will give me a great color and value gamp. Color freaks me out, so this is a pretty important project to help me get over myself.  I have a Baby Wolf 8H 26" wide loom and so need to adjust the draft to fit.  Obviously I don't have to use the full 8 shafts (tho' that would be so cool) and I could probably ask someone in my guild to let me use a wider floor loom for a few weeks to do this.  But, if possible, I'd like to do this on my own loom.

The draft calls for 32 ends of each color at each grey, which is 864 ends.  Sett is 24epi using the 10/2 cotton in the kit.  What's described in the instructions is a twill block pattern - pretty cool when you're also doing value as well as color.

Any suggestions?  TIA!

Heather

Comments

claudia (not verified)

It's looks like the gamp is designed to be 36" wide.  Why not do it in two pieces, each 18" wide?  Are the blocks set up so they divide easily at 18" or can you divide it some way to fit on your loom?  Don't go for the full 26", stick with 22-24" max.  Sounds like a fun project.  Is the warp already wound or do you have the yarn to wind it?  How's this work?  The warp is shades of gray and the weft is____?

Claudia 

hlf (not verified)

If I do all the colors, including grey, there are 27.  The idea is to do 32 ends of each color and the greys, then weave in the same order as the colors appear on the warp.  I haven't started measuring out the warp or anything, since I wanted to make sure I had the plan in place for what I was going to do here.  There's an article on Weavezine that shows some of the possibilities.

I could always break it down in to the colors on one project, the greyscale on another, and just do the full out gamp some day when I have a bigger loom to play with.  This is the kind of project that can be done many, many times to very interesting effect!

claudia (not verified)

I have been tempted to purchase that kit several times.  I can't wait to see pictures of your progress.

Sounds like you have a good plan with doing the colors and greyscale separate.  If you want, you can stitch them together when it's complete.

C

laurafry

Personally I'd look at doing them separately for now and do the full meal deal when you have a bigger loom.  You can still get the grey scale by weaving the greys as weft on the colour warp - you don't need to have the grey in the warp, necessarily.

A colour gamp is a great exercise.  Actually any gamp is a good exercise - you can do gamps in weave structures as well.  A gamp is just a textile that shows many possibilites.  Another popular gamp is to take several overshot patterns, thread up several repeats of each, then weave them off in the same order.  That way you can see how to mix and match threadings and treadlings.  :)

The other thing you could do is simply make each colour stripe narrower, but then it's harder to see the colour interactions.

If you are a fairly new weaver I'd stick with four shafts for now and maybe revisit the idea again later using more than four.  How colour 'reads' in different weave structures could be a life time study.  :D

Cheers,

Laura

sally orgren

I wove the LF dishtowel kit in organic cottons last year, and I found it to be perfect, and I had plenty left over after completing the project. (So no worries!) The pattern was an 8 shaft twill, and the color changes in the different areas were pretty cool. (Fun to weave for that reason too, by the way!)

So, let me see if I have this straight...

The pattern recommends 684 total warp ends divided by a sett of 24 = 28.5" width on the loom. (But you only have a 26" wide loom. :-(

26" wide loom multiplied by a sett of 24 means your warp needs to be 624 threads to fit on your loom. :-0

624 total warp ends divided by 27 colors = 23.1111 warps per color stripe. To simplify, figure 23 warps (per stripe) X 27 colors = 621 total warps. I would just leave the last three warps off completely, or add one to each side/color, and drop the last one, so your warp thread total would be 623. ;-) 

Keep in mind that if 24 warps = 1", then your color stripes are now going to be almost an inch in width at 23 warp ends. The original pattern called for more threads per stripe (32 ends), so those original stripes were probably about 1 1/3" wide.

But really, your adjustment shouldn't change the design hardly at all. You just need to adjust the number of shots of weft to match your modified warp count if you are aiming for square blocks and a balanced weave.

Okay! What are you waiting for? Start winding and posting pictures... ;-)

Sara von Tresckow

When recalculating a draft, keep in mind whether the original pattern had an  odd or even number of threads in each section - or if each "section" is a multiple of something. Failure to take this into consideration may result in odd looking cloth. In this case, it would be better to use 22 ends than 23.

hlf (not verified)

At this rate I'm going to need several lifetimes to go through all the ideas that fascinate me! Lace weaves, becoming comfortable with color, spinning for both warp and weft (and lace knitting), designing for clothing...  I really needed to start at least 1-2 decades ago.

hlf (not verified)

There was the math I was looking for! :-)  But I think Laura is right - if I go much smaller, I will miss some of the color information that's really what I'm after here.  I think I'll do the 20 colors, and then add the 7 greyscale colors as more weft at the end.  That should give me plenty to do for now.  I'll probably do plain tabby for this first go 'round, and maybe if there is enough warp wound on, move in to a twill.

sally orgren

I was basing my estimate of your color blocks on the assumption you were going to thread straight draw (1,2,3,4,etc.) and weave plain weave or twill.

But Sara is right, if there is a pattern involved, considering the number of warp threads per "section" is a valuable thing to remember. 

As I kid I was pretty bad at math, but when weaving came into my life, I had a very practical reason to try and puzzle things like this out. I have certainly discovered the consequences at the loom if my calculations went awry, and they weren't usually *good* surprises!

The next question is:

If you do 20 color stripes across the 684 warps, you get 31.2 warp threads per stripe. (Almost, but not quite that 32 that the kit calls for!) So you either need to drop down to 31 (620 warps) or 30 (600 warps) threads per color. (And you need to decide what to do about the extra 4 or 24 warps...)

How long is the planned warp?

So, do you think you can you figure out how many yards of each color you will using for the warp, and again for the weft?

If you can get comfortable with estimating your materials before beginning, and changing those estimates as you refine your design, it's a great skill to have — good luck!

Sally

...who is not a fan of math, but even less of a fan of buying and storing way more yarn than I will ever need!

WendyB (not verified)

I just finished a lunatic fringe gamp, with the greys.  I had to reduce it to 30 ends/color to fit my loom.  It worked fine--the yarn is great, and the colors were really fun to work with.  I had plenty left over to make another "experimental " gamp and also a longish shawl with long fringe.  Have fun!

sally orgren

For another cool idea with the LF color gamp kit, check out Weavo member Matt's "Lee's Surrender" (under projects)! He used overshot to create even more shading of the colors. 

hlf (not verified)

I saw on the Weavezine article about color gamps that someone did one in huck lace.  I swear, I need like a dozen of these kits with all the things I could do here! :-)

dmahlert

I just finished a few color gamps and am very unhappy with the way the selvedges look with tucking in the last color weft and starting the new weft.

Does anyone have any advice to avoid this build up of weft threads with every color change?

Submitted by Anonymous (not verified) on