I'm slowly getting my weaving studio together, but my Baby Wolf isn't cooperating. I can't get it squared up. The beater hits about 1/16" closer on the right side than on the left coming forward, and vice-versa going back. Has anyone else encountered this problem? How did you resolve it? I'm at the point of wanting to take the entire thing apart and reassembling it! Any advice appreciated. Thanks, LIsa Ann

Comments

gailc

I havent had this problem specifically, but the beater is adjustable. Are you sure that both sides of your beater are adjusted to the same height?

laurafry

And you've checked that the loom is fully extended?  Measure from right front to left back, then vice versa.  Measurements ought to be identical.

cheers,

Laura

lisaann1961 (not verified)

I don't think the loom IS fully extended, but I can't tell what it's hung up on. Again, it's a very slight difference - maybe 1/16". I've checked that the floor is level, and it is. When I lock the beater up right (as if sleying) it's level), and I can't see that it's cock-eyed then...We've checked the height of the beater to make sure it's at the same height for each side...as I said earlier, I'm half tempted to start methodically talking it apart and reassembling it, to see if it's something really minute keeping it from being square. (The loom has had a hard life; my ex kept it folded up in a damp garage for 7 years before 'letting me' have it back.) Thanks, all.

Submitted by Anonymous (not verified) on