Hi,

I have just set up my new (2nd hand) glimakra victoria loom which has a home made stand and has been set up with treadles to replace the levers.

I thought yippee the simplicity of a table loom with a bit more speed.

However I am Shocked that I seem to be only able to weave 1 0r 2 inches before having to wind on due to the space needed in the shed for the shuttle and the restrictions of the angle of the beater. I am sure this cant be right. that would mean on a 3 metre scarf I would need to get up walk around loom to move the warp forward approx 100 times.

Also when I beat that far forward I cant see the cloth or where I am placing the thread - so weaving an open weave is hopeless.

Meaning it would be faster to stick with my small rigid heddle and pick up sticks.

So I am begging anyone with experience of this loom to tell me it this sounds right.

If I measure from furthest forward I can beat to back to the first shaft it is about 6 inches and if I measure forward there are about 8 unusable inches before the front beam.

If this is infact correct and it is just like that then has anyone modified the beater to make a swinging one or hanging one or anything to try and improve this - if so what did you do and if not do you think it would work.

I am so sad - i love this loom but that aspect almost makes it unsuable,

Thanks

Patchwork

 

 

 

 

Comments

patchwork

oh dear - sorry the website kept saying this didnt post and now it has come up many times!! hope it doesnt put folks off replying.

I meant to add - would refixing/moving the existing beater up and to the front a bit help.

the bottom threads are always in the middle of the reed is that where they should be - if I raise the reed/beater they could sit lower down.

Patchwork

sarahnopp (not verified)

I am not familiar with this loom in particular, but is there a way you could rig a pull to release the back brake? That way, when you need to advance the warp, you don't have to get up and walk around it, but simply pull a cord and advance the warp a few inches. If I can find a photo of a mechanism like this, I will link it.

Also, could you add a photo or two of your loom as it is? Perhaps there is something that you aren't noticing but that Weavo people might spot.

 

About multiple posts, I recommend you delete the ones without our comments. It is a bit off-putting as you guessed.

MaryMartha

Patchwork, this sounds like something that could require a picture of your loom to figure out. Table looms do involve advancing the warp more frequently, but it does sound like something may be not quite right.  I noticed the victoria has two sets of holes in the side panel in front of the castle.  The forwardmost hole is for the legs/stand and the second hole is for the beater attachment.  You mentioned it was a homemade stand, but the victoria does come with legs and treadles.

See the glimakra USA site for a picture (though not a large one). 

patchwork

Hi - yes I tried to find a way to delete the duplicated posts but there dosent seem to be a way that I can see. I am not a great computer whizz tho so I find this website a bit unlogical to use. I will try and post a pic of the loom. when i look at the side panel there is ( from front to castle) the ratchet thing, then a hole which my stand goes into, then slightly higher up a screw which holds the cross bar thing (part of loom structure) then a lower hole closer to the castle which the beater fixes into. This is the hole the beater is fixed to. I tried to take the beater off and fix it into the higher holes which are closer to the front. This is a tad high when in the upright positionas the threads touch the bottom of it and also when it lays back against the castle it is at quite a slope back so dont think that is a solution either.

I could try a pull cord for the back ratchet but it is such a good toothy catch that it takes 2 hands to loosen the claw to move it forward as it is.

will try and get picks,

Thanks for help - perhaps it is just like this and I am quicker with the rigid heddle after all :-(

Patchwork

patchwork

one more thing..

it seems to be set up so that when the shafts are in the unraised position they are just sitting on the wooden rebate at the bottom of the castle. Is that right?

perhaps it is something to do with how it is tied up - altho raising the shafts would mean the threads sit even higher in the reed.

hmm and old instruction manual for the loom used with treadles would be useful I guess.

Patchwork

jennybellairs

Lucky you, that you have treadles.  Mine does not, but I did solve the winding frequently problem.  If you are weaving a scarf, you probably are not using the full width of the beam, so you should have room to add live weight tension.  It works like a dream! No more getting up to wind the warp forward. 

I have photos of how mine is set up on my Victoria and a couple other looms on my blog.  You can find the post here:

http://jennybellairs.blogspot.com/2012/07/live-weight-tension-photos.ht…

Hope it helps.

Jenny in Charlevoix the Beautiful

patchwork

Thanks Jenny

I shall have a look at this.

could you watch this post so when I get some pics up you can see how it looks compared with yours.

Also my treadles are very home made (not by me) so I think you could make some too. If you like I can send you some pics of how my ones were done,

Patchwork

ReedGuy

There has to be balance when you go altering a loom. Also, from the photos on the Loom makers website, I see 2 treadles and two lamms. And it's an underswung beater, not overhead. I'm curious what someone has done. I don't think your going to have a lot of weaving length between advancing on a  little loom like that. There is not enough depth and height.

patchwork

HI,

yes mine has an underswung beater ( I mentioned over as I was wondering if it was possible to make a new swinging beater instead - louet kombo style).

as the treadles are home made there are 4 directly tied to the 4 shafts and that seems to work nicely.

what do you mean when you say there has to be balance when altering??

sorry I am still new to looms,

Patchwork

ReedGuy

The weight of treadles has to balance with the lamms and shafts or else shafts sink or rise when at rest. Are there some type of elastics or bungies on the shafts. And I didn't think the treadles on this loom went direct to the shafts, thought there was horizontal lamms according to the website.

patchwork

Hi,

the handlevers have been removed and 4 dowels laid on top of the castle these are held on by elastic loops so have some movement/flex. the tie cords go up from each side of the shafts over pulleys then one to each side of the respective dowel. they then tie under the dowel and a cord hangs down to the respective treadle.

when I press the treadle there is therefore tension on both sides of the dowel so it doesn't move.

I have it set up so that when the treadle is released the bottom corner of shafts are sitting on the wooden side bit of the loom. there is no elastic of tensioning under the shafts.

perhaps this is wrong - that is how it came.

how do you think it should be? - perhaps the official treadle kit would have had bungee things.

I also have an old ashford table loom and it is the same - the shafts just seem to clunk down onto the wood at the bottom ( but then it has no treadles).

Patchwork

ReedGuy

This is something for Joanne to help you with. I can't follow the description too well and I have not examined closely this style loom. But I really don't think your going to get much more weaving space than you have.

Submitted by patchwork on