I'm scouting for an 8-shaft floor loom at the moment (in the UK). I had a conversation with someone recently about the difference between using a flying shuttle on a hanging beater compared to an underslung beater, and he said that the ones on the hanging beaters have more tendency to jump their tracks. I'm inclined towards a hanging beater for two reasons: I want to weave some rugs; and lacking certain muscles, I need the beater's help in beating. I've also seen that on some flying shuttle systems (on the Toika looms, for example) you can move the boxes inward on the beater when you're weaving narrower cloth.

I thought I'd ask what's your experience of using either type here? Useful tips, do's and don'ts?

Comments

Sara von Tresckow

Ono older looms, I've observed many more fly shuttles on hanging than underslung beaters - check out museums, professional weavers, etc.

Joanne Hall

Fly shuttle beaters are heavier than normal beaters, and if you have a wide loom, the beater becomes very heavy.  You would not want to use a lower beater, as using it take more muscle, more effort.  When it comes forward, it moves downward, and then you are actually lifing that weight to return the beater.  I had that on a wide fly shuttle loom once.  They sent the lower beater parts by mistake, but I assembled it and started to weave.  I could only weave a couple inches.  I had to quit and wait for the hanging beater sides to arrive.  I put the beater into the hanging position and I had no problem weaving.  It made a big difference.  (And I was young then.)

Joanne

Submitted by Anonymous (not verified) on