I am wondering if is it true that we cannot do doubleweave easily on a counterbalance loom vs a jack loom because on a counterbalance loom, we cannot raise 3 shafts altogether?

Comments

Joanne Hall

blanket kit and I wove several of them on Swedish counterbalance looms.  It worked just fine.

Joanne

kerstinfroberg

I have woven double layers even on the sort-of-hopeless compromize of a loom shown here. Swedes have been weaving unbalanced counterbalance sheds for hundreds of years before someone told us it was impossible - so I photographed the "project" linked to, just to show... (Granted, I do prefer countermarche looms, but that is not the point, here)

Marianne88 (not verified)

I am glad to see that it is possible because it seems to be a very nice way to weave much largers projects.

Kade1301

I did do doubleweave on a counterbalance loom (Glimakra Ideal) and the most difficult part was figuring out the principle. Once I knew what I wanted to do, the loom did it without giving me any trouble.

Does anybody know the origin of the "unbalanced sheds don't work on CB looms" prejudice? It seems rather widespread (Fannin makes the same claim) when half a minute on a CB loom would settle the question...

laurafry

Yes - it refers to the counter balanced loom with rollers instead of horses, which were much more common in NA than 'true' counter balanced looms.  At least so far as I can discover.  I have a counter balanced loom with the rollers instead of horses and it is true the shed isn't as good when trying to do 3 against 1, but it *is* possible.

cheers,

Laura

Kade1301

isn't it? With horses the 1 vs. 3 sheds aren't full height either, but who cares as long as the shuttle fits through?

Although I'm beginning to lust after more shafts (for undulating twills) I'm absolutely not keen on all that tying up that a countermarch loom seems to demand. A counterbalance loom is so nicely straightforward that I'll gladly live with its little idiosyncracies for the time being.

 

Peg.Cherre (not verified)

I have an old, handmade CB loom with rollers, and have successfully used it for doubleweave and TONS of lace weaves that require 1 v 3 shafts.  When I started, I didn't know I wasn't supposed to be able to do it, so I just did.  I do sometimes shorten the Texsolv cords that go from my top roller to the other 2 rollers to make the shed a bit bigger, but in general haven't found it to be too much of a problem.  And I don't think my little loom has a particularly large shed even when I'm weaving 2 v 2 shafts.

jsorensen (not verified)

Hello,  like all good weavers I have lent out my books,  the doubleweave in particular.  Is it possible to weave doubleweave on a countermarche?  If not,  I do have a counterbalance setup, never used, for my Glimakra 65 inch floor loom.  Any help or suggestions appreciated.  Thanks for any replies.  

jsorensen (not verified)

Hello,  like all good weavers I have lent out my books,  the doubleweave in particular.  Is it possible to weave doubleweave on a countermarche?  If not,  I do have a counterbalance setup, never used, for my Glimakra 65 inch floor loom.  Any help or suggestions appreciated.  Thanks for any replies.  

Joanne Hall

on either your counterbalance or countermarch.  I once taught a doubleweave workshop for our guild and I brought a little counterbalance loom that I had made from a table loom.  All the other looms were jack table looms.  And, it was my little counterbalance loom that had the nice sheds, especially for the pick up.  It was very hard to do the pick up on the table looms, which are jack looms.

Joanne

Sara von Tresckow

Countermarche looms have a connection for EVERY shaft movement - up or down - and this makes them suitable for EVERY weave structure that can be done on a loom with a single harness, shafts and treadles. 

Submitted by Anonymous (not verified) on