If you have a pattern you like for 4 shafts (eg m’s & o’s) that you want to convert to double width on 8 shafts, how do you thread and treadle that? Do you start your threading from right to left and then when you get to the left side continue back to the right side?? Like a sideways U? how do you treadle then? the same? thanks a bunch!

Comments

laurafry

No.  You thread both layers at the same time, generally one layer on shafts 1-4, the other layer on 5-8, alternating.  Or you can thread one layer on the even shafts, one layer on the odd shafts.  Then you design your tie up to reflect which threading you have used.  

Sounds like you need a good reference book on weaving double weave.  Paul O'Connor has some that can be downloaded for free if I remember correctly.  Search for double weave or double wide weaving.

cheers,

Laura

Broderie (not verified)

Thanks Laura! I will do that!

MaryMartha

Here is a link to Paul O'Conner's Reference book for double weave.  I was just looking at it this morning.  He seems to favor the odd and even approach.  Nice to have confirmation that using 1-4 for one layer and 5-8 for the other will work.  Is there any advantage to odd and even? 

Also, in the reference book there is an illustration for having the open end on four shafts come in the middle of the top layer, thus possibly minimizing draw-in at the fold?  Does anyone know if this works well on 8 shafts?

kerstinfroberg

On my website, I have a couple of articles on how to construct double width (ans also double layers, interchanged). Here is the link to double width (part1).

And MaryMartha, of course it works on 8 shafts, too (or 16, or...). I have never tried it, but I can't see how it will prevent draw-in; to me it sounds like there is instead opportunity to get draw-in at *both* folds (instead of only *one* fold line)... And, unless you thread your top layer on double the needed shafts, it will be awkward to insert the shuttle in he middle. Unless there is a wide gap, of course :-)

laurafry

The odd/even approach to threading is just that it is easier/faster than interleaving the first and last four shafts.  The advantage of interleaving the two layers is easier to do the tie up.  :)

cheers,

Laura

ps - I still have copies of Kerstin's book Weave a V for purchase in NA, Kerstin has copies for purchase in Europe  PM either of us for details

Broderie (not verified)

Thank you all so much for your experience & intput. Obviously I need all the help I can get :) I will definitely read up your references and try this!

ReedGuy

Later this fall I will be using double weave (double width) to make some blankets in birdseye. Was reading Kerstin's blog and with help from software to get the treadling right (the threading and tie-up was more intuitive to figure out). Anyway, it looks like my draft begins on the top layer. Using a countermarche. My blankets will be theoretically 100 inches (836 ends) wide before draw-in and shrinkage, 52.25 inch on the loom. 35 skeins of 2-ply wool per blanket. :)

Submitted by Anonymous (not verified) on