I've just finished making myself a simple raddle (by hammering some nails in at carefully measured intervals of a piece of wood). It works out cheaper than buying ready made equipment and can be very satisfying, although the results are unfortunately reliant on skill (or lack of in my case). 

I was wondering, does anyone else out there in internet land build any of their own equipment? 

 

Cathos

Comments

tien (not verified)

Yes!  There's even a group for those who make DIY equipment: http://www.weavolution.com/node/3375

If you join the group and go to the forum you can see the DIY reed hook I made for my new 30-dent reed.  (It's too fine a reed for conventional reed hooks, at least without bending the dividers, but a tool fashioned from 10-mil sheet brass works nicely.)

Cathos (not verified)

 Whoops! I still haven't quite got the hang of the forums yet. Thanks.

Michael White

Cathos, I make everything for Cheryl's looms. From benches, to raddles, lease sticks. In fact I just shipped a raddle and lease sticks to a lady in CA. I built a 22 inch 4h loom , a copy of a Harrisville loom, pictured here. This loom was made in 1984 and has been used for years at shows for demoing. I would be happy to help you make your own equipment. I also made the bench

Michael

klarence

Keep trying to get on here and keeps saying "Page not found"

bolivian warmi

klarence, try this link which will take you to the DIY group page.

sarahnopp (not verified)

Thanks for the link, I immediately joined!

steve104c (not verified)

There is also the group "Home Built Equipment" Look in the "group" section for this group. Then put it in "My Groups", then you can check it when ever you are logged on..................Steve.

r1mein54 (not verified)

Wow, nice to know about this AFTER I have just finished posting in Projects the "wire shelf" reed I made a few days ago.

francorios (not verified)

It's beautiful! Tell us about it!

Have a good day!

Submitted by Anonymous (not verified) on