I am in the process of setting up a new-to-me Cranbrook loom.  This loom has texsolv heddles and all my other looms have had flat steel heddles.  What are the pro's and con's of cutting the heddles once they are on the shafts? 

Comments

Dawn McCarthy

As with all things weavy, some prefer to cut, some not.  I prefer to cut as I don't care for the way the next heddle comes partway along for the ride. Some of my threading plans can be quite complex and I love to be able to reach easily back to the lease sticks to get the next thread. Also, if you have a tendency to move heddles from one shaft to another, cut heddles allow you to move small groups easily.  My suggestion is try it without cutting first and don't cut them until you are ready to commit.  Texsolv is strong so cutting them isn't the worst thing but try a full threading with them uncut to begin with.

Dawn

Ellen (not verified)

I cut mine too, but have heard of other weavers who don't. I'm like Dawn above, I like the freedom it gives you. The only disadvantage to cutting is they are not as easy to keep in order if you do move them from shaft to shaft, but it can be done if you tie around all their "legs" first.

theresasc

Thanks for the feedback.  I am planning to get my first warp on the loom this weekend and I will see how it all goes.  I finished putting the loom together last night, and it sure is pretty! 

ReedGuy

I've left mine in tact because so far I'm only weaving with 4 shafts. If I was using 8, than I would probably give a different answer. ;D And as Dawn mentioned sometimes the linked heddles jump one another when you bunch them close as you move along the shaft threading the heddles.

Submitted by theresasc on