I'm thinking of doing an M's and O's with a warp of Homestead 8/2 cotton (which has a 15% shrinkage rate) and a weft of 8/2 tencel. I am concerned though that the difference in shrinkage amounts could cause problems---in which case I would switch to a cotton for the weft as well (I am considering the tencel because I like the glossy contrast it has against the matte finish cotton). I will test it with a sample first, but wanted to know if anyone else had any experience, knowledge or advice about using these two fibers together. Thanks so much!

Comments

laurafry

Using one as warp and the other as weft won't cause problems. 

I like using a mat vs a shiny yarn.  :)

Cheers,

Laura

Dawn McCarthy

 Deborah, I have used a combination of 10/2 pearl cotton and 10/2 tencel for a christening shawl and it was lovely!  I noticed little variation in the shrinkage.  However I agree that sampling first is key.

 

Dawn

[email protected]

 

Martha-Weaves (not verified)

 Deb, I have used both 10/2 and 8/2 tencel as the warp and 10/2 and 8/2 cotton as the weft for shawl and scarf patterns.  After wet finishing and a good ironing all the projects have a lovely drape and a soft hand.  Enjoy your project.

Happy Weaving, Martha

Deborah Heyman (not verified)

Thank you all!........your responses were really helpful. Now I can't wait for my yarn order to arrive!

Deborah Heyman (not verified)

Another question I have about tencel (which I haven't used before); I was reading about how it has "fibrillation" when washed, which results in a "sueded" texture to the yarn (one article described it as "split ends"). If I want to retain its glossiness, does it matter whether I wash it in cold water or hot water? Since it will be used in combination with a 100% cotton, does the method of wet finishing make a big difference?

laurafry

The type of Tencel available to handweavers does not fibrillate to the degree that you get a suede effect.  The yarn will remain nice and glossy.

That said, it will cast off a certain amount of dust - the drier the climate, the more it will dust off.  I run a humidifier when weaving with Tencel during the winter (our dry season).

Cheers,

Laura

weaversouth (not verified)

I routinely wash then dry til damp, then press with my iron.  Pressing it while slightly damp really brings up the sheen! 

I love tencel and use it a lot.  I've had some great results combining it with wool, silk and chenille.  It's a wonderfully-versatile fibre!

have fun with it

Nancy C.

Su Butler

I have a piece on the loom now, Tencel warp with Tencel and cotton weft......having already removed one piece from the loom and processed it, the result is gorgeous.....soft, drapey - really nice. 

A-100 Tencel, an early version of the product, used to fibrilate.....the newer versions available to us today do not do it to the same degree.  However, if you have a long Tencel warp, you will have some fibrilation due to abrasion from the reed and you have to watch for the little "hairballs" that can form on individual threads and cause neighboring threads to entangle and break.  Since Tencel is a regenerated cellulose product, you must be careful to weave with it at proper tension, not too high, so you do not experience too much elongation while the piece is on the loom.  Treat it the same way you would treat any rayon and you will have good results.  Do not wash Tencel in hot water, rather use water that is warm to your touch.

Happy weaving....my piece should come off the loom today! 

Su

claudia (not verified)

Su,

Looking forward to seeing your finished pieces. Are they in your projects notebook on Weavolution?

Claudia

Submitted by Anonymous (not verified) on