Clipboard Loom - Toba Sash Inspired

 

Dr. Carol Ventura, Professor of Art, has created a wonderful website http://iweb.tntech.edu/cventura/ with hundreds of pictures and dozens of articles.

When I saw the article "Sashes of the TOBAS of ARGENTINA" http://iweb.tntech.edu/cventura/pickup.html showing how to weave with warp floats on a small frame loom, I knew that would be part of the fiber adventure.

(click on picture for larger image)


Seeing the loom described by Carol V, I thought of a clipboard. I found a hefty legal size one for 99 cents at a thrift store. About 9 inch by 15 inch.



I cut it down to 13 inch so it would fit in my book bag. Using a fret saw is easy and I can cut curves.


With a drill larger than the rivets, I drilled out the rivets holding the spring clip so it can be removed.



I marked a two inch border, drilled holes in the corners, put the saw blade through the holes, and cut along the lines to open the center of the board.


Board is cut, extra holes are to tie on the dowels. All cut edges were sanded smooth.


As I weave the band will get tight on the loom. The plan is to remove a dowel to create some slack so I can manipulate the band. I read that somewhere on the internet.



Here is the band warped up on the loom.


So far, so good. The loom is working with a string heddle and shed stick. I'm using a plastic debit card with notches cut as a shuttle and beater.

Have a good day!

Comments

mischiefmanaged (not verified)

Looks great! I like how you can use inexpensive household items to weave. Maybe you've invented "office-supply weaving" . . . ??!! :)

Cindy

francorios (not verified)

Thank you.

I like using simple tools for weaving because frankly I cannot afford to buy and store the big, fancy looms. I have friend who has three floor looms and she'll loan me one any time I want but I still do not have room.

I know it takes me more time to complete some pieces, but at least my loom can fit in a drawer or the closet between projects.

And if this helps people overcome their lack of resources, if it helps them look at things a new way, that adds to the fun.

Thank you again!

Have a good day!

francorios (not verified)

The Clipboard Loom has passed the public transit test!

I was able to weave on the bus with it!

Have a good day!

mischiefmanaged (not verified)

Well done! Years ago I used to knit on the bus . . . I love portable projects & gear, whether you take them on public transit or to sit out in the yard on a nice day.

Are you in the weavolution DIY group? I think they'd love to hear about your clipboard invention too.

francorios (not verified)

Okay, I posted a link at DIY group.

Thanks!

Have a good day!

francorios (not verified)

Clipboard Loom update


The clipboard loom passed its public transit test. I've been weaving on the bus/train to and from work.

(click on picture for larger image)

Here is my loom. I've stuck a copy of the pickup technique instructions between the front and back warp to help keep things separate. I use a large re-closable plastic bag to contain the loom before I stuff it into my book bag. There's enough room for a pair of scissors too.



Here is the back of the loom with the paper removed. As weaving progresses I can slide the warp down and around the loom. As you can see, the patterns are two sided on the band with colors reversed on each side. You can see where I first started not doing too well, then the little light in my brain turns on and the pattern starts getting organized.

 

You can also see what happens when you choose a weft color that is not the same as the border color, all the outer weft turns are easily seen. Using a matching color would be less noticeable.

 

One more note. I made the loom 13 inch long which is the longest size for my book bag. I will make the next loom 12 inch to make it a little easier to stuff in the bag.

 

Have a good day!

francorios (not verified)

Clipboard Loom - First band finished


(click pics for larger image)


Here is the first finished band, 18 inch long, about 5/8 to 3/4 inch wide, using 17 wpi cotton thread. The upper part of the band in the picture shows where I began, just fooling around and the lower part is when I figured out the warp floats. To finish off the band I kind of did a loop back through the band.





Here I put the weft through, then put a crosstitch needle in the shed, then closed it and put the next pick through.




I cut the thread, put through the needle eye.




Then I pulled the weft through the band. I'll trim the thread at the band edge and may use some "fray-check" type of glue to hold the ends when I start making bookmarks with this loom.



Have a good day!

francorios (not verified)

The Toba adventure just keeps coming.

Do a search for "telar toba" and you will get many hits on spanish language websites (telar = loom in spanish)

Beautiful weaving and very good looking looms. Use the "translate" feature on your web browser to get a clue.

Buenos dias!

francorios (not verified)

I highly recommend this site:
http://angeltelar.blogspot.com/2008/09/especial-telar-tobatcnica-bsica.html

Includes a tutorial on weaving on the toba sash loom with details of the construction that shows everything you need to see to make your own loom.

It's in Spanish so get your spanish/english dictionary out.

The tutorial is a picture file so you can't copy and paste the text into a translator, you would have to type it all in.

Have a good day!

tommye scanlin

 Thanks for this link!

This loom could also be an easy small tapestry loom.  The tension adjustment with the top bar being moveable would make that quite possible.  Nice tutorial in photos; even though I don't read Spanish I can certainly read those pictures!

Tommye

Joanne Hall

Hi,

This loom is something like Glimakra's Freja tapestry loom.  Glimakra's loom has little hooks for attaching the warp so that the warp is wound on the top of the loom.  And it has a cartoon holding board, the possibility for string heddles and small legs to hold the loom at a slant on the table.

http://glimakrausa.com/products-looms.html#l9

Joanne

Submitted by Anonymous (not verified) on