Hi Everyone

Has any of you experienced bringing a used loom into the US from Canada?

I have had a few offers for a loom I advertised, from weavers in the US, who are concerned about crossing the border with it.

As far as I see it ,it's just a few pieces of old wood, but one can never underestimate anything these days.

I would appreciate hearing from anyone who's been through it lately.

Esther in London, ON

Comments

laurafry

They need to check with US customs. 

Cheers,

Laura

naturalfibres (not verified)

I just had a look at the US Customs Prohibited and Restrictive Items list  and there is nothing on the list in regards to wood, wooden items or furniture.  It would probably be best if the buyer contacted a US Customs office to verify that they can bring the loom across the border and see if they would have to pay duty on it.

Artistry

I don't know about wood however a receipt of purchase is necessary to asses duty.

Karren K. Brito

There is a certian amount of purchases that are exempt from duty, then you pay.  Don't know what the amount is today. But I found this:

The United States grants import duty exemptions to American citizens returning from abroad. Individuals returning from non-US territories are entitled to an $800 duty-free exemption. Items in excess of $800 are assessed an import duty tariff. Customs and Border Patrol use a specific method to calculate import tariffs.


Date May 2010. Looks like your home free if you paid less than $800, or take more than one person with you.

Sara von Tresckow

I import looms. There is NO duty required on handlooms. Heddles and reeds might incur a slight charge when in a shipment of new merchandise. Goods over a certain value (ca. $2500) require customs brokerage fees when imported as new goods.

There should be no problem returning with a used loom - be sure to document the purchase.

kerstinfroberg

And be sure to document that it is, in fact, a loom.

Of course I don't know about US customs, but a Swedish customs anecdote: I bought ("imported", if you will) a couple of tahkli spindles from the US. There is no duty on (hand-held) fiber equipment - but I had a hell of a time to convince the customs that they were *not* fishing equipment (on which there is duty). "Spindles" - you can hear that that is about "spinning" - and "spinning" has to do with fishing - so...

Sara von Tresckow

Also, that $800 tourist limit can be multiplied by the number of persons in your party - coming back from our trip to Europe, we pooled out purchases for double that amount.

jander14indoor (not verified)

In the past year, I've brought back two looms to the US from Canada via car, seperate trips, dissasembled.  One a Leclerc Fanny I paid $500 for, and the other a VERY old Leclerc Mira I picked up for free.  I had a bill of sale for each countersigned by previous owner and myself.  At the border when asked what I'd bought in Canada, I answered truly and was waived through the gate with little interest.

I don't know if it made any difference, but I'd been in Canada (Toronto area) for an extended business trip both times, don't know if a day trip might generate different questions, but I expect not.  I live in the Detroit Michigan area and travel south to Canada occasionally for shopping, no issues bringing stuff back as long as the amounts are reasonable, as stated above.

TAP TAP (not verified)

I am lucky to be close enough to the border to pre-register with Customs those items I intend to take out of the country and bring back home. I wait for a day and time of day when they are not very busy, take my receipts, the item, and complete the appropriate form (which can change from year to year so be sure you are using the current one)which they have at the counter. The agent takes a look at the equipment to confirm serial number or other identifying marks, compares it with my receipt and what I have said on the form. If all is good, he or she signs and stamps the form. They keep no paper work. I take away the signed form which I keep in a file with all my others. It makes going through customs a breeze and trip preparation, when time comes for that, much simpler! Anything foreign made, even though purchased in the U.S., is especially suspect to duty, therefore be certain to take the receipt along. Also, there are specific Customs numbers for each kind of item which are listed in a big fat book usually kept at the counter. You can look up what the protocol is specific to your items to understand better what duties or fees might be levied. Sometimes the Customs agents are curteous; other times you would think they had just eaten fire. Keep your cool; they are your employees.

Sara von Tresckow

The "big fat book" is the Harmonized Tariff Code - can be found on government web sites.

Looms are found in the section that contains oddball machinery, including nuclear reactors. You can browse that on your computer and check out the designation for all of your textile equipment.

kbird (not verified)

I purchased a loom over the internet (very nervously) from a private individual... not something I recommend, but weavers are a trusty group...

Anyway, I needed to get a 10-ft+ loom from Calgary to Portland.  Also, I was not going to be at the border to help escort the item through customs.

Here's what I did:

Hired a Calgary area shipper to go to the site and package/crate the loom (4ft x 4ft x 12ft), then take it to their facility.

Hired a national? shipper (Kamino) to pick up the crate from the local shipper, transport across Canada, across the border in Vancouver BC, then on to Portland.  This made the customs paperwork significantly easier - handled by Kamino.  Then, I had to rent a truck to pick it up from Kamino's shipping depot in Portland.

I don't think it's particularly easy to find and hire a shipper to do "small" jobs like this, but our company was routinely shipping items across the Canadian border.

All of this cost somewhere in the neighborhood of $1000, which was also comparable to the cost of the loom.  (A terrific 10ft wide Shannock style Tapestry loom with worm gears for precise tension control)... originally manufactured in Poland.

If I had owned a truck that could have accommodated this loom, I might have tried to drive it across the border myself, but I was uncomfortable managing the customs paperwork as well, so the combination of issues made it more comfortable to hire the job out.  It would have also been a minimum of three days travel time/gas/lodging, which starts to make my costs look very, very reasonable.

Hope this helps

Kay

Submitted by Anonymous (not verified) on