I'm about to get a new reed for my loom, I received the New Weaver's Award this year from Creative Fibre NZ and this is one of the things I'm spending the money on.  I currently have an 8 dent and a 13 dent reed and am trying to work out if I should get a 10 or 16.   I'm wanting to work up to weaving fabric for sewing, in particular a tartan to make my husband a kilt in his clan's pattern.    The only wool I have access to here is a 110T/2 yarn which I've never woven with and currently don't have enough of to work out the WPI on it.

I'll probably also weave teatowels, scarves and shawls.

What would you recommend?   The 10 or the 16?  I want to make sure I don't waste the money.

Comments

CelticCats

Yes, Reeds are expensive.  I recently purchased a 22.5 so that i could use 16/2 cotton to make ripsmatta rugs; then realized that the colors I wanted to use weren't available in 16/2 so decided to dye my own cotton yarn that I had, but it was 10/2.  Having already purchased the reed, didn't want to purchase another one.

 

So here is the great part, the Reed Convesion Chart.  I have found some of the charts don't go very high, but some do.  And, figuring out the conversion yourself also works.  The 16/2 is dented at 4 threads per dent, but I figured out that I could do 9 dents at 4 threads per dent and then the 10th dent with just 2 threads and would get the epi I wanted.

 

See what you can come up with with the two reeds with conversions and then pick the one that gives you the most options.

 

Hope this works

 

=^.^=

MJWallace

From the conversion chart, you can see that it is easy to get setts which are divisible by 4 or 2.   The 10 dent reed will give setts divisble by 5  such as 5, 15, 20 etc.  

If you are anywhere with a hint of humidity, serious looking at a stainless reed.  On of the task I have had to do at the guild is to try and clean rusted reeds.

MargaretJane

sewsable

I'd definitely be going stainless as the only place in NZ that I've found that sells them is Ashfords and they only do stainless.  I've also had to get a reed cleaned (my 13), I was lucky to have access to a friend who had a sand blaster he could set on low.   I've since protected it with a dry silicon and it's not re-rusted and it's smooth as well so I think I was very lucky.   The 8 is the one the previous owner used most so it's pretty clean.

sewsable

I've ordered the 10dpi one today, thank you for the advice

sewsable

I've ordered the 10dpi one today, thank you for the advice

elenapearson

i also think that you should go with the even numbers. that way you wont be spending much and will get the best option available. australia online gambling
Submitted by sewsable on