Hi all,
I'm a new proud owner of an 8-shaft Loomcraft in pristine condition. (48" loom, bench, 10 hardcover weaving books, warping board, electric bobbin winder, original paperwork and manual, ten shuttles including an end-feed, and about 40 skeins and cones of yarn, total cost: 500!) It's already assembled and looks great. But I have a few questions as I've not used a Loomcraft.
My other loom has what I call a "full-on" apron. That is, the apron is a big honkin' sheet of cloth tied to the front and back beams, with a metal dowel on one side to tie/lash-on. The Loomcraft only has straps with a wooden rectangular dowel on the end. I'm assuming there's no need to make an apron due to this. At least I hope not. Also, can I tie directly onto these wooden rectangular dowels? I'm thinking it might be better to use lease sticks which then tie/lash onto the dowels. My concern is if I tie directly onto the dowels then they might bow and eventually snap.
Any suggestions on best practices for tie-downs on this loom? The previous owner used what appears to be some sort of smooth twine. The method involved lots of knots. I'm thinking of using Texsolv. I use it on my other loom with no issues. Any other things I should know about the tie-down process with this loom?
Any advice and suggestions about this loom are much appreciated.
Comments