I will attempt a direct warp, but this will be more ambitious that previous projects... I've given this some thought as to how to do this, but would like comments...
I believe I start by pulling a loop of both colors (2 ends each) into every-other slot from back to front. The start then appears to look like this before winding the warp onto your warp beam:
| o | o | o | o
Abab Abab (|=slot, o=hole, A=end, B=end, capitalized=final position)
From this initial threading, wind the warp on it's beam, inserting paper as usual until I'm left with a foot or so of the warp. Now, I have this series of moves to redistribute the warp as it's sleyed through the heddle. Here's the first move:
move one 'b' color/end right to a hole:
| o | o | o | o
Aba B Aba B next, move one 'a' color to the next slot
| o | o | o | o
Ab A B Ab A B And the final:
move other 'b' color to a hole
| o | o | o | o
A B A B A B A B
Or is there a better way??? Steve
Abab Abab (|=slot, o=hole, A=end, B=end, capitalized=final position)
From this initial threading, wind the warp on it's beam, inserting paper as usual until I'm left with a foot or so of the warp. Now, I have this series of moves to redistribute the warp as it's sleyed through the heddle. Here's the first move:
move one 'b' color/end right to a hole:
| o | o | o | o
Aba B Aba B next, move one 'a' color to the next slot
| o | o | o | o
Ab A B Ab A B And the final:
move other 'b' color to a hole
| o | o | o | o
A B A B A B A B
Or is there a better way??? Steve
Comments