hello everyone!

i'm starting to feel a little slow here...i'm trying my hardest to do a project completely on my on...drafting a pattern, etc. I feel like if i do something all by myself from start to finish i'll climb this learning curve i'm on...with learning to weave (it's feeling like a steep one!)...a bit faster...seems like my brain will grasp all these things i'm (trying to) learning faster.

so here's my dilemma:

i have the kromski 32" harp...and i have 2  10dent heddles and 1 12 dent heddle...and i don't know if its my lack of experience but seems like all the darn yarn that i have (and have been buying) is not correct for the setts of these heddles. (urgh!)

i have a variety of 8/2 cottons, a couple of 8/4 cottons, a linen 8/4 wetspun, some cones of harrisiville shetland, some cottolin, jaggerspun zephr, 8/2 tencel, and a few wools that are fingering sport (2800 yds/lb)...

i want to weave a scarf/sampler and play around with some of the patterns in davenports textures/patterns book (the lacy ones)...because i really want to climb this slooooow learning curve i'm on...but i'm wondering...and i'm guessing that all my yarns are too thin for my heddles. (sigh) :(

can someone please help me? i've looked at all the setts recommendations...and based on what i have i don't know what to do..should i just go for the gusto and try and warp a double heddle? or would that be too hard for a beginner trying textures/patterns? for some reason doing double ends in the holes/slots seems to daunting right now...

i think i know the answer...double heddle...i guess i just need a sounding board, some prayers, chocolate and some encouragement...lol

any advice is surely....surely...surely welcomed and highly appreciated! 

*and to think i keep begging my hubby for a 4-shaft loom...my brain is *barely* grasping the heddle...i think i better leave well enough alone...lol*

Comments

francorios (not verified)

If you want a lacy texture, your yarns would look thin in the heddles.

Have a good day!

Caroline (not verified)

hi, If you are wanting to do a lacy and/or textured yarn, many of the yarns in your stash would be good for that with a 10 or 12 dent heddle. This would give you a scarf that is more an accessory than a neck warmer and would be soft and drape well. The Bronson weave we did for a previous WAL would be a good place to start, using a pick-up stick, or if you prefer to keep it much simpler, there is Leno. Franco has blogged about his adventures with leno, and the bronson for the WAL was very easy to set up. I picked up every other thread through the slot of the heddle, and it comes out a with a charming  warp twist to give a pretty texture. It was also easy to weave plain weave.  I used crochet cotton no 5 with my 10 dent heddle and it was ideal for all sorts including table mats etc. A nice open weave. it also goes quite fast and you can get into a rhythm.

This is where the dreaded word "sampling" comes in; warp up and experiment, do a sampler trying out different yarns as warp and weft, and see what happens. You will suddenly have your "aha" moment and see what you want to do.

Hope this helps.

claudia (not verified)

Caroline is right, sampling is the way to go.  I would use the drafts and ideas in either of Davenport's books and save designing your own drafts for another time.  Get experience with the weaving process.  The RH loom is perfect for learning all about weave structure.  Plain weave has so many variations and when you add color, it adds more variation.

Slow down, take a deep breath and pick one thing to work on.  I would stay away from double heddles until you get some experience with different yarns and how they work on the RH loom before I would add a second heddl, just MHO.

In using the 8/2 cotton you might try either doubling the yarn in the holes and slots or take a look at doing it 150%.  Davenport has a terrific section in the Patterns and Textures book on page 67.  I used it for some knitting yarn I am working with and I wanted to warp it at 50%.  I warped it in every other hole/slot combo and then wove a 12" sample and wet finished it (measure before and after so you know how much pull in and shrinkage you have) and gave it a hard press, let it finish drying and then re-measured everything.  Turns out 50% was a good choice so I am now weaving the scarf.

Hope that helps.  Take it one bite at a time, chew slowly and swallow.  And I love your enthusiasm for weaving! it's great.

Claudia

quejimenez (not verified)

 thank you so much for your responses! yes it helps tons!

i slept on it last night...and yes dreamed about weaving...lol...

i still don't know what i'm going to do...i think i'm leaning towards trying to warp two heddles...i'm really interested in working with double heddles...so i'm guessing i might as well conquer it all at once...i'm going to wind a short scarf warp about 60" long plus more for waste and what not...i'm hoping to try out as many techniques as possible and then end up with something funky and useable...

i'm thinking i'll just see what happens....

thanks for your responses on my heddles/yarn collection...everything that i was reading was leading me to believe that the combinations would not work...too lacy...its good to know that others have tried it and had some success and made some beautiful fabrics!

thanks again...

i'll keep you all posted on what i do and discover...

 

claudia (not verified)

I highly recommend the Weaving calculator in the Resources section for calculating the length of the warp.  I leave about 12" for sampling and 12" for loom waste.

Give it a try.  You may find it as addictive as I have.  It has also taught me a lot.

http://www.weavolution.com/weaving-calculator

Claudia

quejimenez (not verified)

 thanks for sharing that...i checked it out...bookmarked it...and i already wish i had it when i was calculating and winding the warp for this scarf...love it!

Submitted by Anonymous (not verified) on