I want to buy some crochet cotton to use on the RH loom but not sure what size is best for a 10 dent heddle.  Is size 10 crochet cotton the same as 10/2 unmercerized cotton?   What about size 3 crochet cotton?  is that the same as 3/2 perle cotton?

Claudia

Comments

Joanne Hall

Hi Claudia,

Crochet cotton usually has more plies than weaving yarn, and it is more tightly spun and plied.  If it looks like what you would like than it will probably work.  Which warp you choose depends on what you are making.  For instance, it would probably not be very absorbent for a towel, but it would be fine for lace weaves and for placemats with a thicker or softer weft.  Joanne

claudia (not verified)

Hey Joanne,

So much for the towel.  But I could see napkins or placemats.  I also thought it might make a nice lace weave shawl or scarf.  I take it crochet cotton produces a softer hand than 3/2 or 5/2 or cottolin or linen.  I am using it on a rigid heddle loom.

BTW, have you used linen on a RH loom?  Can you get tight enough tension and maintain it?

Claudia

Joanne Hall

Hi Claudia,

I did not see your answer, but I am not so very late in replying.  Two ply threads will feel softer than threads with more plies, but it also depends on how tightly they are spun and plied.  Crochet cotton needs to be tighter for the way it is normally used and to show the stitches of crocheting and tatting.  So, they are not really made to feel soft or to be absorbent.   

For a lace weave scarf, see Handwoven May June 2009, last spring, page 62 for a lacy scarf called Light and Lacy by Madelyn van der Hoogt, using a 2 ply worsted wool.  This is a four shaft pattern, but it can also be woven plain weave on a rigid heddle loom, either by using two or three strands of yarn as one, or by using two 8 or 10 heddles to get 16 or 20 threads per inch.  This has been a popular project.  I have had my students show me their scarves from this Handwoven project.

Yes, I have used linen on the rigid heddle loom.  I used 8/5 linen rug warp on the 18 inch Emilia.  I used a size 10 heddle and skipped every other space and hole to get 5 warp threads per inch.  I used Mattgarn, Swedish rug wool for the weft and I have made a very nice small matt.  It would be a good bath mat or a runner for a coffee table.  It has a Southwest look.   It is a little thin to call it a rug.  But it is completely weft faced and it was not hard to beat at only 5 epi.    If I were a little better with computers I would post the photo.  I will try it later.

I have no problem with keeping a tight tension.  But linen requires careful warping so that the tension is the same on each thread. I would not recommend it to a beginner until they have woven several projects.  And it is best to only put on warp for one project, since linen does not stretch to make up for any inconsistencies in the beamed warp.. 

The sheds are plenty big.  I beat with the heddle, and about every fifth weft I press down with the stick shuttle while it is in the shed.

I will be teaching a transparencies workshop in January for our guild, using linen.  I will be putting it on a rigid heddle loom as part of the class and I am confident that it will work very well.

Joanne 

claudia (not verified)

Hi Joanne,

Thanks for all the info.  I'm not really a beginner, I have been weaving 5 years and started on a 4 harness and 8 harness loom.  The RH loom is almost 2 years old but I have only started weaving on it a lot recently.  I am getting faster at getting projects on and off quickly. 

I have used linen warp on the Baby wolf for towels and my tension was very good.  I learned from Tom Knisely at the Mannings with help from Peggy Osterkamp's books. 

Now, as for pictures.  Here is where the best video on how to do pictures on Weavolution can be found:  http://www.youtube.com/watch?v=8pmEdxZUyY0  It takes you through step-by-step and it's fast and easy.  Promise.  I am horrible on the computer and this is the best way to go.  Please give it a try.  We would love to see your work.

Would love to join you for the transparencies workshop but January, in Montana.  Not sure I have clothing warm enough.  DC is considered to be the South by most who live here and our winters are considerably warmer, less snow and shorter than yours.  We're real snow wimps around here.

Claudia

 

 

Joanne Hall

Hi Claudia,

I am sure you would do very well with linen.  I did want to warn beginners who might read my message.  Linen is not very hard to weave with, but one must use their best warping methods. 

I will check the link on photos that you sent.  Thanks.

Weather in Montana is up and down.  A weaving student came in late January once and we took an afternoon off to go to a hot springs.  It was actually warm enough to walk the one block distance outside to the outside pool, in our swimsuits and barefoot.  But we got an early winter here this year in October.  Even with that, I picked spinach from my garden yesterday.

Joanne

 

Caroline (not verified)

I'll swap you for my Australian summer, its 37C outside and only 10.30 am! Last week I was in winter clothes.

Kurt Pippin (not verified)

Hi,

I think Laverne and/or some of the backstrap weavers use crochet cotton. You may want to ask over there.

Crochet cotton comes in sizes 3 through 100, 3 being the largest.  I just put some inexpensive size 10 next to some unmercerized 8/2 cotton, and the crochet thread is slightly thicker. I think size 3 is the only one I'd want to weave on a rigid heddle. Size 10 is so tightly twisted (usually, if it's good) that it could be hard to tension and make sheds.  I just got 28 wraps per inch with size 10.  Size 3 is usually less firm, since it's made for garments.  I don't have any handy, but I think it would work at 10 dpi, depending on what you're making.

Kurt

Submitted by Anonymous (not verified) on