OK, folks, I really feel silly asking this question but here goes:

Can bookmarks be done successfully on a floor loom????  I've got two floor looms and would like to warp one for bookmarks.  I thought they might be a great way to do "samples" and yet have something useful when done? 

I tried to do some this past weekend but none of the patterns/drafts were turning out correctly?  They always looked squished together from the weft - with none of the warp showing through - and I couldn't tell one pattern from the other? 

I know it's something I was doing incorrectly but not sure what?  Everything I did looks more like ribbed versus actual pattern? 

Can anyone tell me what I was doing wrong?  I was using various patterns from Anne Dixon's Handweaving Pattern book.  Maybe it's not possible to do this?  Oh, and I was using carpet thread for both warp and weft.  Hand the warp set at 12 epi.

Thanks for any suggestions.  God bless.

MerryMac

Comments

Caroline (not verified)

Hi Merrymac, could you post a photo, please so we can see what is going on?

It sounds as if you might be beating too hard, and so creating a weft faced fabric instead of a more balanced weave. Thats why it looks like its ribbed. Are you using the correct size warp for the sett?

I haven't tried doing anything as narrow as book marks on a floor loom, but I would have thought carpet warp was too thick for that anyway, so perhaps you might be better off trying for a mug rug or table mat - they are a great size for a sample, and you can make a set of them using the same colours but different treadlings/threadings etc. Or a shoulder bag - there is a marvellous pattern around for a bag made from one long thin strip of fabric - no cuts anywhere! all these are a bit wider than book marks, but wqill gove you a good idea of what the pattern looks like by having a few repeats in them.

donisdelis.blogspot.com/2009/01/little-tutorial.html

tells you how to make the one-piece bag.

But please post photos with a few more details like the kind of yarn you are using etc, so we can give you more specific help.

francorios (not verified)

So you had your loom warped at 12 epi.

Take a ruler and measure how many weft per inch in your weaving. It should tell you how many more weft you have in your fabric.

I know I was surprised find that my plainweave is not very balanced. I am reading Mary Black's New Key to Weaving and she writes that 50/50 balanced weave (equal warp epi and weft epi) is difficult to master.

That will be my next "apprentice" weaver goal.

Have a good day!

lkautio (not verified)

There is no problem with weaving bookmarks on a floor loom.  People do it often. 

If you are beating to a "feel" rather than beating to a number of ppi then a narrow piece will beat in much tighter than a wider piece (less friction).  Use a rule and make sure the ppi are what you want them to be - 12 will give you a balanced weave on this sett, like most of the samples in the Dixon book.

Finer threads will be a bit more elegant and distort the book spine less, but carpet warp will work. In cotton 10/2 or 20/2 would be thinner and allow more threads for more complex patterning in the width of a bookmark.  Other useful items for sampling include dish towels (cheap in 10/2 cotton!) and mug rugs (coasters).  There is a book by Penelope Drooker called Samplers You Can Use that you may find interesting.  It is out of print but can be found used and in guild libraries.  You might enjoy looking at the Complex Weavers Award ribbons, another type of use for narrow sampling bands.  I wove the ones in 2004:  <http://complex-weavers.org/awards.htm>

Laurie Autio

merrymac (not verified)

Thanks to all for the suggestions and info.  I believe I am beating too hard ... easy to do with that small an item?  The thread measures out at 20 epi when I do the ruler wrap method? 

I'm pretty stubborn and now have it it my head that I "can make a bookmark" successfuly!  Sooooo ... in a few days, I will try again but with a lighter thread?  I really was hoping to use the carpet thread for them, though, since I have quite a bit of that and I think it is good for trials? 

I will have to see about the book by Drooker.  I haven't seen one, I don't believe?  Also will check out the bag suggestion.  I'd really like to see what the material is going to look like before making final decision on something larger? 

Thanks again.  God bless.

Merrymac

claudia (not verified)

Merrymac,

When using the ruler method, make sure you wrap the yarns close to each other and the total number of wraps per inch is divided in half for plain weave and at 75% for twill.  Your wraps per inch do not equal your ends per inch.  That might be part of the problem.

I used up a whole lot of carpet warp on 6 placemats I just finished.  You can check them out here.  It was great, they are stiff being set at 18 epi but not inflexible.  They lay nicely on the table and not every crumb falls through.  One of the drafts showed lots of warp floats and I tried one placemat like that but it's a fork grabber so it'll stay in the drawer or get cut up into mug rugs.

Good luck with the bookmarks.  I think you may like the finer yarn.

Claudia

merrymac (not verified)

Well, duh.  Thanks so much for the info, Claudia.  I looked and looked through the weaving books I have and did not find that information.  It's probably there but I either skipped over it or didn't know what I was looking for?  I definitely have been beating way too hard!   :)

I've got a 22" warp on my Baby Wolf (Nemo) using the carpet warp.  I was (am?) hoping to get a decent pattern woven so's I can make a small throw rug?  But I may well switch that plan over to table mats so I can see the different patterns?  Then make a decision on the rug?  I plan on using carpet warp for the weft.  I have warped the loom with a 15 dent reed.  Is that going to make it too tight (again?  sigh.) 

I am now planning to warp my Gilmore with a finer thread to attempt the bookmarks or even the bag mentioned above? 

Before I forget, I really like your placemats. 

Thanks again.  God bless.

MerryMac

claudia (not verified)

The size of the reed is not the concern, it's the sett you are concerned about.  You can use a 15 dent reed and sley it every other hole for a sett of 7.5 epi.  Focus on the overall goal of the project, start with the basics, ept (and, therefore, sett), ppi and those will be determined by the yarn you are using and the hand you are trying to achieve.  Carpet warp is good for many types of projects but it is, at the end of the day, carpet warp.  

I have found the weaving calculator to be a very valuable tool, have you tried it yet?  It's here.  The fringe setting is not working you have to add it in yourself but everything else is great.  I know lots of people who are using and enjoying it.  I believe it's the best place for you to start.  When you wound the yarn around the ruler with the 8/4 carpet warp what did you get for sett?  The other place to find the answer to what sett to use is on Interweave's site, here.  Click on the Master Yarn Chart.  I believe they give 3 numbers for each yarn.  The first is the recommended plain weave sett, the second is for twill and the third is for lace.  You can check that on the first page. It's a great table with almost every yarn in it and the setts are already there.  I printed it and keep it near the yarns in my studio for planning purposes. 

I hope these things help you in your project planning.  The only other thing is to sample, sample, sample.  And don't be afraid to take the sample off the loom and wet finish it before you decide if it looks right or not.  Stretched out on the loom it's hard to really see what is happening.

Claudia

Submitted by Anonymous (not verified) on