Caroline (not verified)

I think the traditional way is similar to the Navaho string heddle. This is the first shaft. Then there is a large round stick to separate the second shaft naturally. Other picks sit behind that,also on a long string heddle. To make it easier to attach the string heddle, you can make a channel in the wood at each end, otherwise the string can slide off - guess how I know??

Its interesting that in many Asian cultures, the backstrap loom is incorporated into the floor loom, the seated weaver strapped to the front bar of the loom, which can have 4 shafts with heddle harnesses and treadles and a fixed frame. The warp is not wound around the back beam, but while still chained, its tied to an upright pole in the ground, or even stratched back on itself. So there is no one "correct" way to set up a backstrap loom, although each country that still uses it has its own traditions and unique practices. The fabrics woven on these looms is generally magnificent, as in Thai silk, and many of the fine eastern Ikat fabrics. Our 8 and 10 dpi reeds seem very coarse in comparison!

I have a couple of sleeveles jackets made by the Hill Tribes in the Golden Triangle. Both have cross-stitch embroidery, as well as inlay, and are beautifully woven. I'm not sure what the fabric is made from, as its much stiffer than you would expect from cotton. But they were made on backstrap looms many years ago, before civilisation and the Western world became too intrusive, so it might be banana or nettle.

francorios (not verified)

Got it.

Now I just have to find time for this back straploom in the rotation!

Have a good day!

francorios (not verified)

Got it.

Now I just have to find time for this back straploom in the rotation!

Have a good day!

Manicgirl (not verified)

Hello all

I haven't actually tried a backstrap loom yet, but I have plans to! My intention is to get the material to build my loom this summer, and hopefully start weaving on it too. I now there's very little equipment needed to build this kind of loom, but I still need to get the wooden parts, and I never seem to find the time for that.

It's comforting to know there is a forum dedicated to this kind of weaving, once I get started.

My interest in backstrap looms started last fall, just by chance, when I found a book at our local second hand store, called something like Backstrap weaving in Guatemala (Bjerregaard), and then the Online guild had a workshop on it this spring (unfortunatley, I was unable to participate). And now this forum. It feels like the universe is trying to tell me to something... :)

Manicgirl (not verified)

Hello all

I haven't actually tried a backstrap loom yet, but I have plans to! My intention is to get the material to build my loom this summer, and hopefully start weaving on it too. I now there's very little equipment needed to build this kind of loom, but I still need to get the wooden parts, and I never seem to find the time for that.

It's comforting to know there is a forum dedicated to this kind of weaving, once I get started.

My interest in backstrap looms started last fall, just by chance, when I found a book at our local second hand store, called something like Backstrap weaving in Guatemala (Bjerregaard), and then the Online guild had a workshop on it this spring (unfortunatley, I was unable to participate). And now this forum. It feels like the universe is trying to tell me to something... :)

Caroline (not verified)

I have the Bjerregaard book, as well as one by Marilyn Anderson on Guatamalan Textiles, and some of my other weaving books too devote a lot of chapters to South American weaving - there is a lot of information around, and once you have the string for the heddles, and a couple of broomsticks, dowel and an S-hook, we won't see you for dust, lol! In some cultures, the first thing you weave is the backstrap itself - a nice belt to hold you inside the loom!  I made mine using card weaving, which also uses the backstrap for tension.

And if you don't have a handy tree, you can brace the back beam against your feet and sit on the floor with your legs stretched out, which is when the phone always rings, or the cat sits on your lap, lol!.

Caroline (not verified)

I have the Bjerregaard book, as well as one by Marilyn Anderson on Guatamalan Textiles, and some of my other weaving books too devote a lot of chapters to South American weaving - there is a lot of information around, and once you have the string for the heddles, and a couple of broomsticks, dowel and an S-hook, we won't see you for dust, lol! In some cultures, the first thing you weave is the backstrap itself - a nice belt to hold you inside the loom!  I made mine using card weaving, which also uses the backstrap for tension.

And if you don't have a handy tree, you can brace the back beam against your feet and sit on the floor with your legs stretched out, which is when the phone always rings, or the cat sits on your lap, lol!.

francorios (not verified)

Caroline Wrote: "And if you don't have a handy tree, you can brace the back beam against your feet and sit on the floor with your legs stretched out, which is when the phone always rings, or the cat sits on your lap, lol!."

That sounds handy, but what if I want to make something longer than my 30 inch trouser leg measurement?

Have a good day!

francorios (not verified)

Caroline Wrote: "And if you don't have a handy tree, you can brace the back beam against your feet and sit on the floor with your legs stretched out, which is when the phone always rings, or the cat sits on your lap, lol!."

That sounds handy, but what if I want to make something longer than my 30 inch trouser leg measurement?

Have a good day!

Caroline (not verified)

hi Franco, somewhere on Carol Ventura's pages there is a photo of an Indonesian weaver from Bali, if my memory is correct, sitting on the ground with her legs outstretched. The warp is a long one, and the extra is wound onto the warp beam/dowel then lashed to another piece of dowel to stop it unravelling. This is what she keeps under tension with her feet!

In Nepal, they keep the warp chained, and clamp it under tension to a handy upright, which is probably not as convenient if you have to keep getting up to adjust everything to wind the warp on, but given the widths these weavers make, it would not be wound on that frequently. Many of the Asian village looms are a sort of hybrid loom, part backstrap and part  floor loom with shafts and treadles, so they can be taken apart for storage in the roof. I stumbled upon this while doing research for another project, so no prize for guessing who got sidetracked, hehe!

I'm now reading about the nomads of Ladahk, who also use backstrap looms, and have their own weaving traditions, and it will be interesting seeing how  the techniques compare to the South American techniques, as Ladahk and Nepal have been pretty isolated until the last 20 years or so; parts of Nepal beyond where the roads finish are still only accessible by foot and porter, and its only recently that Pakistan has allowed Westerners into Ladahk, with tragic results.

I'm sure there is a lot that we can learn from these traditional weavers, hopefully before their culture and traditions vanish forever.