steve104c (not verified)

We are not horders, but it is hard to throw anything away that has potential for new life in another project. We do recycle our class,alum.metal cans,cardboard and paper. So we try to reuse broken tool parts too. Especially the metal parts(nuts, bolts,brackets and specialty parts). I will post on this group when ever I find a new life in weaving for and old part......Steve.

steve104c (not verified)

Here is a picture of a tension box modification. Clamp was purchased @ Woodcraft.  www.woodcraft.com  

TheLoominary (not verified)

Nice! And it's far superior to the factory version. I used a similar one purchased through Amazon when I built my pegless version of the tension box. Frank.

steve104c (not verified)

Is this your design? I use several of those clamps on my cutting jig for ukulele fret boards. These clamps are very versitale when building your own jigs. I keep several on hand and have several threaded insert plastic knobs. They work and look better than wing nuts. I've replaced all the wing nuts on my Harrisville Desing Loom with plastic knobs...........Steve.

TheLoominary (not verified)

Hi Steve, the tension box is my own design. The warp slides between two tempered plates. The tension bar can be easily removed as most warps work well with just weight of the plates. Slicker warps may need the slightest bit of extra tension.The bottom comb will swivel to narrow the path for a perfect fit between the beam pins.These clamps are great for so many things.I first started using the heaver version years ago when I worked in the metal trades. Frank.

missbeckyohh43 (not verified)

Frank,

I have a guy who is willing to do some woodwork (and metal work) for me in trade of some sewing work.  I want to get one of these, and I was wondering if you would care to sell your design/plans?

Because this guy is wanting A LOT of sewing work from me, this is why I am looking for plans in many tools I am wanting for weaving. 

TheLoominary (not verified)

Hello,this tension box was built specifically for a certain loom, and most likely will not work well on many other looms.The principle behind any tension box is to create an even drag on the warp while loading it on the beam, that said, most box's use adjustable pegs with combs to do this. My unit is a bit different in that the warp slides between two 1/4" glass plates. A simpler version could be built using a glass plate set in a wooden frame, a removable top plate, and combs at either end. A clamp as shown in the tension box photo's above will fix it to the back beam. A peg style tension box will be easier to build and work very well. Google- loom tension box, and look for images to help get an Idea of it's overall design. The combs (reeds) can be purchased on-line at Leclerc Looms.Hope this helps, Frank

SarahMGreen (not verified)

I've kept a small amount of dyes tucked away so I can test their longevity over the years.  These are the results after four years.  The colors are Amazon Green, Flame Red, and Sunshine Yellow.

pine tree (not verified)

How have you set the Greener Shades dyes when painted and dried on silk?  Ironing did not work for me.  Not acidic enough?  Not hot enough?  

The dyes run easily.  Steaming may be difficult.  Thanks

tien (not verified)

I've mostly done single-shade immersion dyeing of yarns, as I buy my yarns white and dye before using.

However, that is about to change...the warp currently going onto the loom is 20/2 tencel, and I plan to use an alpaca weft...then use various surface design techniques (batik, shibori, etc.) with both acid and fiber-reactive dyes to produce interesting results.  I am hoping to get different colors in the cellulose warp and protein fiber weft by using the two different dye types, and mix them in interesting ways.

Photos once I have them, of course!

Tien

P.S.  I've also done some woven shibori samples that came out beautifully!