whiteoakgrandmother (not verified)

Tina, standard warping pegs do allow a cross, but with your space issues I don't think it would work for you unless you could do your warping outside. You have to have enough room to stretch your warp the full length, so they take little room when stored, but a lot of room in use. You might want to consider having a woodworker make you a small warping board that can be disassembled. Lap joints at the corners, and wing nuts on bolts that hold it together. There is another warping peg method for rigid heddle looms that uses only one peg, but I don't think (?) it would work for a table loom, and it also needs room when in use.

doreenmacl (not verified)

Thank you for this post! I have been puzzling about how to do direct warping for a small project on a table loom. I will definitely give this a try. I have used a warping board, an upright floor mill and a horizontal table mill. My absolute favourite was the floor mill but I really did not have room for it because it did not fold, so traded it for the smaller horizontal table mill, which comes apart and folds flat. I found I could not use my wall mounted warping board when I was making a silk warp at 30 epi for tartan with very dark colours- impossible to see what I was doing. One day I hope to have another floor mill which folds back flatter to the wall eg the Leclerc model.  Anyone have one for sale?! :)

TinaHilton (not verified)

Apparently I'm not getting notified of comments.  Thanks for the ideas.  The direct warping does sound interesting.  As for making a collapsible warping board, I don't know why I didn't think of that.  My hubby has a whole room full of woodworking tools, so I'll ask him if he can try making one soon.

Judith (not verified)

I have a large Glimakra warping reel. It is the best tool I own. It makes warping a pleasure.

Claudia Segal (not verified)

You beat me to it.  I would definitely have it like this:

1- shafts 1 &3
2- 1
3- 3
4- 4
5= 2
6- shaft 2 & 4  

I had my loom set up differently when you were here.  I prefer to rock back and forth and that's what you can do here.  In fact, if you are doing a twill, you can have one foot on 2 and the other on 5 then lift your left foot off 2 and put it on 3 for the shafts 2&3, etc and from there.  You will only have to lift one foot and have a partially closed shed when you beat.

What do you think of that plan.

Claudia

BonnieI (not verified)

I spent time around Oaxaca in 1981 and 1973. I hope there is still plenty of weaving and embroidery around there! Teotitlan del Valle is famous for woven blankets and rugs and you could spend hours walking around this village. Many people spun their own yarn and dyed it when I was there. Their products are sold in many places but it is fun to see the looms, spinning wheels, homes, and meet the people.

There is another village which specializes in woven bands and belts. You might ask Laverne Waddington about this. I bought several belts for very low cost. Near the belt village we bought embroidered dresses which were popularly known as Mexican wedding dresses. The embroidery is extensive and beautiful.

Don't miss the ruins or the delicious food in this area!  Also I bought beautiful handmade decorated leather sandals in the market in Oaxaca.  If you head south into Chiapas, there are different textiles there, and you might see some of those in the markets around Oaxaca.

We had a family reunion in Oaxaca and loved it.

Bonnie Inouye

Ellen (not verified)

I have tried so many times to write an answer to this post, and every time they have just disappeared!!! Out of sheer stubbornness, I'll try just once more:

I agree with the way Kerstin explains everything, but would like to add, that even though I learned to tie all the treadles up the same, nowadays I go for tying the back lamms tight and then looser and looser towards the front. It looks messy, but gives a perfect shed. 

steve104c (not verified)

Claudia, Krestins explanation looks good. I ended up getting Joannes Hall's "Tying Up The Countermarch Loom". It troubleshoots that problem and Krestins solution seems to be the same as Joanne's. I'm not trying to sell Joanne's book. I tried everything before I gave in and bought it and have'nt regretted it. Most of the time I am unable to get what someone is tryng to explain to me without seeing it. So if all fails call Joanne............Steve.

Claudia Segal (not verified)

Thank you all.  I have  Joanne's book and Lundell.  I did what Kerstin suggested and am rolling along nicely now, just one thread out of place and that can be fixed easily.  I wish I knew why it happened.  My first 3 warps went really well.  The only thing I can think of is that this one is tencel and much lighter than the cotton warps I worked on first.

Is that possible?

Claudia

 

Claudia Segal (not verified)

You have a few choices.  In Betty Davenport's book, Hands On Rigid Heddle Weaving,she has a diagram showing how to thread two ends in each hole and slot of one heddle to increase the sett.  You could use your 8 dent heddle and just double everything.  Or, if you want to use 2 heddles, you should use the 12 because you get 150% when you thread through 2 heddles.  There are several diagrams for doing this in the Rigid heddlers group in a past WAL.  You can find those here.  

If you just scroll through this group, you will see several topics beginning with sett and two heddles in the title of the post.  Those are all good posts to page through and read.

Hope that helps.  Please feel free to ask more questions and post pictures.  What yarn are you using?

Claudia