swelch (not verified)

I have spoiled myself a bit equipment-wise... I am a fan of Bluster Bay and AVL end-feed shuttles and the AVL electric bobbin/spool winder.  For shuttles, I seem to go back and forth between my Bluster Bay mini 11" end feed shuttle and my heavy, 15" AVL end feed shuttles.  The Bluster Bay is just plain pleasant to the eye and hand, while functioning very well, but sometimes the extra capacity and weight of the AVL shuttle lure me away.

As far as bobbin winders go, I've used an adapted drill, one of those Swedish winders with gears, and a few varieties of double-ended electric winders.  I now use an electric AVL winder outfitted with a tensioner and yardage counter, as it works well and very fast for spools, pirns, and bobbins.  I couldn't design a better winder if I tried, and I'm an engineer who loves to tinker and improve upon things.  The only downside is the hefty price!

Hope this helps!

tien (not verified)

I was a fan of Bluster Bay until I tried one of their shuttles with a springy metallic yarn.  Total disaster.  I also find that they are very fussy to thread when using fine yarns (for which you need to thread through more hooks).  I had a set of four BB mini end-feed shuttles, which were wonderful and a joy in the hand, but I gave them up in exchange for a set of Schacht EFS, which are much faster to thread (just lay in the thread) and have not looked back.  I love the outsides of BB shuttles, but I am not a fan of the hook tensioning system.

The Schacht EFS does require an Allen wrench to adjust, but I hang mine from a little hole drilled in my loom (a tool space that came with the loom) so it's always ready to hand.

Barbara Keyser (not verified)

I prefer my Boat shuttles - wood only - the plastic doesn't move smoothly over the warp.  I have 2 sizes of single shuttles & a double one I picked up to do 2 colors - all work great. I got a hand crank bobbin winder & it works well.  No need for power for me, but others using finer yarns may prefer the power ones or that modified drill idea.  Weavers are so clever! 

marlenedg (not verified)

 A cordless drill was part of my Christmas present from DH this last year along with a compleat tool set. I thought at the time,why do I need all that, I can just go outto you shop and get what I need. Then I got my loom. I have used most everything in that took kit but the drill is the best. I put a wood stick with some tape wrapped around it in the drill and just slide the plastic bobbins on. Set the thread on the spool holder and wind away. Only problem I have is not enough bobbins cause I get so carried away winding bobbins I fill them all up. I bought plastic ones for 99 cents instead of making paper ones. Next time I get back to the weaving store I am buying more. So fun to fill!

Marlene

sequel (not verified)

A double ended bobbin winder will wind up just about anything, from the tiny quills for damask shuttles to any size bobbin or pirn.  Mine is a manual one from Schacht.

A shuttle all depends... if it's too light, it may lack momentum needed for wide warps.  If the tips on low profile shuttles are too low, they may pick up warps from the lower shed on the way through, especially if you have a slack lower warp, sometimes a problem on LeClerc looms

If you use a shuttle with an oval bobbin cavity, like Schacht, you'll need Schacht style bobbins with extra collars at the ends.  Use LeClerc bobbins ("flat" ends), with LeClerc shuttles (rectangular cavity).

On the other hand, if you have a narrow warp and your bobbin unspools too fast, a collar type bobbin in a rectangular cavity shuttle will slow down the unspooling...

 

 

 

jemwork (not verified)

Wonderful job. I'm going to check out your process as well.

My Ikat is more random than this, but I'm a pretty random person. The recent article in SS&D about crossing the Ikat with Ikat appeals to that sense. I have some I may try that with - a huge indigo dye project I'll never weave as warp. Its 9+ yards long!

Caroline (not verified)

hI Becky,  What a disappointing start to an enjoyable hobby! Do you have a Guild or group close by where you can meet other weavers and perhaps get to a few classes? We have several Guilds listed under the Resources tab. You don't say how far you got with your teacher, or  what kind of loom you have so this is rather a generic reply, but basically you need to get yourself a good instruction book to start with, to make up for what you missed with your teacher. It never does any harm to revise the basics anyway.

If you are a rigid heddler, I can recommend Betty Lynn Davenport's Hands on Rigid Heddle Weaving.

If you have a 4 or multishaft loom, try Deborah Chandlers book Learning to Weave.

These books will cover what you need to learn before you launch out and try and find a pattern without knowing how to read it. The Chandler book is set up as a series of tutorials, so its very easy to follow as if you were in a class.

There are plenty of resources available for weavers on the internet, but you do need to learn the basics of warping, how to read a draft, how to throw the shuttle, how heavy to beat for an even weave, what epi and wpi are and how to calculate the sett of your project, and other stuff, and both these books have projects and exercises that will help you do just that. They are also far more readable than many of the older weaving books so it doesn't feel as if you are back at school and its all too technical.

As for the yarns.............the easiest way to work out what they mean is to find a chart. If you have an issue of handwoven handy, they do have a page or so of photos of yarns that are actual size. Different yarns have different sizing systems, which is a pain, but basically if you see something like 20/2 or 12/2 for a cotton thread, the first figure is based on how long a skein of yarn is when spun to a certain weight/size as a singles. I think the weight is a pound and its based on how many yards you get out of it. The second figure tells you how many strands of that yarn have been plied together to make the thickness of yarn you are looking at. I hope this is not too clumsy, but as an Aussie, we work in metric, not in pounds and yards. Anyway, a 20/2 is pretty fine, and a 12/2 is a thicker yarn so the higher the first figure, the finer and thinner the yarn. Both yarns are 2 strands, that is they are a 2 ply. You can have any amount of plies to make up the thickness of the yarn. This numbering system is not the same for wool or silk or linen. You can see the ranges and sizes of weaving yarns sold by weaving supply shops if you go to the advertisers list under the Resources tab, or visit the Shop tab ( unless you are running an ad blocker on your computer in which case you will see an empty page). It doesn't help when many magazine and books also refer to knitting yarn sizes for some projects, grrrrr!

Once you settle into a routine of weaving again, you will find that all these terms and things are not as arcane as they appear now, and you will feel far more confident about what you are doing. The time to branch out is once you have a few more projects under your belt, and as you know already, there are some great projects in magazines and books, and some supply shops even have prepared warps, patterns and enough weft for a project in kit form.

Keep asking your questions, thats what this forum is for, and I'm sure there will be more people along to give you words of welcome and fill in any details I have missed or messed up.

Cheers, Caroline in Australia, where its after midnight, and I am off to bed!

Weavalong (not verified)

Hello Becky..........

 

It's a pity about your tutor, hope you find another.

I'm a new weaver as well. Hope you don't mind I've added you to my favourites in order to read your questions and the answers to them. I'm sure all new weavers more or less ask the same things.

It's advisable to join a Guild in order to see what others are doing. It's also a good idea to find a teacher and do some one2one tuition. I found warping difficult from instructions in books. It's easier to warp on a warping mill or a warping frame with four posts on each side.......Harris Warping frame.

All the books recommended by Caroline are good and very useful. More or less standard reference books for weaving.

Are you in the UK?

missylea (not verified)

Hi Becky!  I'm in Texas and in a similar predicament to you.  I'm ready to start project #2, but I'm not interested in tea towels, table runners or another scarf.  So what do I do now?  And where do I get ideas?  Don't get discouraged yet . . . we'll figure this out. 

We look forward to all you "old-timers" sharing internet sites, books, etc.  Thank you so much!

<MD><

Claudia Segal (not verified)

Hi ladies,

I found beginning weaving classes to be the best start.  One option is the classes available HERE on Weavolution.  Most of the teachers listed are offering private 1-to-1 assistance.  You might try PMing Mary Rios by going to her profile HERE and click on "Send this user a message".  W

Uncertain about taking classes on Webex?  Join the Open House.  You do not need a webcam but it's a nice feature when you are first learning.  That would be the fastest thing to do.

Do you have access to a copy of Handwoven?  Or how about looking over some of the older weaving books such as Mary Black's New Key to Weaving.  The Big Book of Weaving has great projects and they are incremental.  Easiest ones first then progressively more challenging.

Claudia