wilowind (not verified)

 

 

I also use a claw hammer (on carpet) or a rice bag to drag along for tension. I've also seen a method whereby you stand at teh back of the loom, grab the warp & twist it to provide tension while you wind it. I don't know how well the later works with long warp, Hope that helps.

Cathy S/Willowwind

tien (not verified)

I put an index card over the ball winder "core" and tape it tightly together.  Friction keeps it from coming off while you're winding (you do have to wrap it TIGHTLY), but afterwards you can just grab the end and slide it right off, index card and all.  Bonus: you get a cardboard "core" to the ball so it doesn't collapse in on itself and tangle.

I know some other people use toilet paper cores for the same purpose, but I've found them  to be too loose, and never seem to have one lying  around when I want one.

That said, I use a conewinder most of the time, these days...have a Silver Needles electric conewinder (pricey and slow) and a double-ended bobbin winder with a conewinding adapter that Sandra Rude's husband Mike made for me.

Tien

francorios (not verified)

I've seen the grab and twist method for putting tension on rigid heddle  also.

That takes a little more coordination than I can muster.

The concept of "tying it to a rock" is exactly where my head is at.

Thanks for the reply.

Have a good day!

Aunt Janet (not verified)

I have a wooden swift, mounted with the axis horizontally.  I just put too much pressure on the ball winder.  A lesson still in the learning.  I will look into a squirrel cage swift in the future.

Thanks for the reply.

Janet

SusanP (not verified)

Actually, I am looking for tips rather than offering one right now.  I just bought my first end feed shuttle.  I opted for the Bluster Bay mini because the project I need it most for is working with 20/2 spun rayon for scarves.  I was having trouble with the floating selvages breaking and I figured that if I could eliminate the draw in the problem would be solved.  Well, I just love the shuttle, but I am having trouble mastering the knack of winding the pirns.  This shuttle uses cardboard pirns and the flair at the wide end is minimal.  I was hoping to find a video of someone winding pirns so they feed smoothly.  Does anyone have any suggestions? 

tien (not verified)

Have you looked at the Bluster Bay website for their instructions?  http://www.blusterbaywoodworks.com/instructions.html

When working with their cardboard pirns, I make the back end bigger by winding just a little bit more yarn on the back part when winding back and forth.  You have to be careful not to get too greedy - if you make the back end too big too fast, the yarn tends to slide off resulting in an unholy mess!  (Ask me how I know...)  Practice with some junk yarn in a waste header first, is my suggestion.

If you find that you would prefer to use a larger Bluster Bay shuttle with more conventional pirns, I have a full-size Bluster Bay EFS that I would LOVE to trade for a Bluster Bay mini - so send me a message if you are interested in a swap.  (I have a small shed and find that the minis work better than the full-size ones in the same shed.)

Hope that helps!  I don't know of a video, but maybe the instructions will be helpful?

Tien

SusanP (not verified)

Hi Tien,

Thanks for your suggestions.  Yes, I have read the Bluster Bay instructions...many times.  I thought if I could watch someone wind the pirn it would help.  The first pirn I wound worked fine (before I read their instructions) and then the second one isn't feeding smoothly at all....and I thought I was following the instructions on that one.  I know I just have to practice and I am using the end of a warp as practice space.  I still have about a yard of weavable warp on there to play with.  What I really need the practice with is winding the pirn.  I may have to go back to winding it the way I did the first one even if it isn't the "correct" way to wind them.  I can't complain, this is only the second pirn I have wound.

Sorry.... but I don't want to swap shuttles.  I bought  this one for the smaller profile and lighter weight since I am doing scarves with fine threads and it is just perfect for that.  Thanks for the offer though!

BTW - did your wedding dress get accepted for the Convergence Fashion Show? (I can't imagine that it wouldn't get accepted...it's so beautiful!)  I can't wait to see it in the flesh!

Susan

SusanP (not verified)

Hi Janet,

I did the same thing so I know your frustration.  What I ended up doing is taking the the center post of the ball winder out and using the ball to wind bobbins with the center post still in it.  After I got it about 1/2 wound off I was able to remove the rest of the ball from the center post.  I had thought I would try wrapping cardboard around the center post next time, but it sounds like you did that and it didn't work either.  What I do now is wind onto cones using my double ended electric bobbin winder.  Someone on Weave Tech described doing that a few months back and it works like a charm.  You need the pointy ended cardboard cones and a jar lid that fits into the base.  I used a nail to puncture a small hole in the center of the jar lid to hold the point of the bobbin winder. 

I'd love to hear if you come up with an even better solution.  Good luck!

Susan

tien (not verified)

A quick search on YouTube finds this video: http://www.youtube.com/watch?v=xjGh0jtIIFw

It may not help you in figuring out how to handle the thinner end of a Bluster Bay mini, though, as it depicts a more conventional pirn. 

For winding on a Bluster Bay mini pirn, the important thing to keep in mind is that the yarn should NEVER drag over a bump in the pirn - that's a sure recipe for tangling.  So instead I start gradually building a small cone that is wider on the back than on the front.  I start with a flat layer, winding back and forth for about a quarter to a half inch.  I slowly build up the back end by continuing to wind as in a "normal" pirn (back and forth in a cone shape), but I gradually make the back end of the cone wider by spending a little more time winding onto the cone end each time I return for another pass.  This results in a slow buildup of yarn in the back.  The key is not to make too steep an angle at the back end of the pirn, or it will tend to fall off.

Practice winding with a worsted weight yarn, under tight tension - the pirns are small enough that it won't take that much of a worsted weight yarn to fill one, and then you can wind it off and use it for another practice round.

I found also that once I mastered the art with a regular pirn, it was a lot easier to figure out the Bluster Bay mini cardboard pirns.  So if you're really stuck, try it with a more conventionally sloped pirn and see if that helps.

And yes, the dress was accepted into the Convergence Fashion Show, so it will be at Convergence.  See you there!

Tien

SusanP (not verified)

Tien,

Thank you for the really helpful suggestions.  I think you're right about practicing with a heavier yarn at first...I will give it a try.

Congratulations on getting into the fashion show.  I would have found it very hard to believe if your dress hadn't made it it.  I really can't wait to see the real thing.  The photos on your blog are beautiful!

Susan