Caroline (not verified)

I've got to lesson 3 on my mini inkle loom, and no problems so far with sheds - fingers crossed! Photos tomorrow; its nearly midnight here and I'm off to bed.

cheers, Caroline

seaphish (not verified)

Jeanne,

Are you using graph paper and colored pencils?  I wonder if the velum graph paper would be useful since it is semi-transparent (could be flipped over if you wanted to reverse the design)?

 

Carolyn

jeanne (not verified)

Hi Seaphish,

The vellum idea sounds nice. Probably more durable than plain paper.  I used plain printer paper. I cut the graph paper to width and copied it to a full sheet because it's easier on my eyes that way; also I can make notes on the margins of the sheet if I want, and keep it in my notebook. I also made the pebble weave markings on the master copy.  Saves tired hands to only need to draw in the design! Any transparent paper that can go through the printer could also work if you wanted to reverse your design. I have done this, but the paper can get stuck, so you have to feed it in very carefully.

I abandoned the colored pencils because they are hard to erase! Went to a plain HB pencil and a nice big mylar eraser!

Jeanne

Caroline (not verified)

My first pebble weave attempts on my inkle loom:

Apologies for the bad photo! You can see the first band which was Lessons 1 and 2, and a simple wavy line, and I started Lesson 3 last night. I'm using regular inkle heddles for this as there is not a very big sweet spot for weaving on this tiny loom. The pebble sheds are in the heddles and the background shed over the tension paddle, and it is working very well!

Caroline

Caroline (not verified)

I have an Ashford mini inkle, and love it! Its small enough to perch in my lap, and I can still use it for short warps instead of my warping board. The yarn I am using is 4 ply cotton, different brands, but the green is Semco and the orange Milford, both Australian brands, and neither is mercerised. I have had no problem with lint build up on the heddles.

One thing I have worked out with the wider piece is to slack off the tension a little bit so as to allow the warp threads to "bloom" a little - its purely cosmetic, but the warps cover the weft better - its also a 4 ply but a bit denser yarn than the other two.

Picking the pebble shed is not a problem for me, I have small hands and can get my fingers in there easily, but someone with larger hands may have problems and would need to use continuous string heddles for the sheds.

Once I have these lessons under my belt, I want to work with Perle # 5 or 2 ply as its much easier to get hold of and I have a better choice of colours. Its also a lot finer!

Caroline (not verified)

Yes, its one loom and two names. I don't have problems with it rising up because I am using the inkle heddles, instead of a continuous heddle - no pulling sheds open. I can put my hand behind the heddles and manipulate the sheds that way:

I raise the green shed from behind the heddles to create the background, and push the green shed down to create the pebble shed. My hands are small enough that I can create a large enough shed for me to be able to pick out the warps I want to use and drop the others. I am using the shuttle that came with the loom, but could probably do with a smaller one.

Hope this explains it.

Caroline

 

 

 

 

 

jordanj (not verified)

 Carolyn and Laverne,

I spent yesterday traveling in the car and had taken my inkle loom along to work on a plain band. I was sitting in the back seat with pillows to support the long loom. After about an hour, I got tired of having my body all twisted up, and was holding my inkle loom in my lap and I thought.... what if I used the heddles for the the pebble sheds of an APW band? Up shed could be Pebble 1 and down shed Pebble 2... but how to get (and maintain) a plain shed??? Imagine my surprise this morning to see your conversation! Have you two found any way to keep the plain shed (like what the cross stick does in the backstrap) set up?. I see that fingers can be used for a picking shed, but on a wider warp, say 2.5-3 inches, a more permanent system might be nice.

Jennifer

jordanj (not verified)

Well.... it seems like there should be a way to make it work - the pebble sheds would be so easy! Oh well, I'll let it go - this bird motif is taking all of my brain power anyway! Here it is...

 

I missed a pickup in his "chest" area, and there is a white line on the back of his head - is that caused by a twisted warp thread? I was trying to be so careful and even unwove a bit to see if I could find a twisted thread, but all was in order. Maybe I didn't go back far enough...

Another question I have is this: When I pick up a pebble shed, the warps are all in order by the string heddle, but if I put my shuttle down at the fell line, many of the threads are back in their plain weave shed order. So I spend an awful lot of time getting the threads back in the correct order. Is there a way to avoid this?

An additional question - mistakes sure show up a lot more on the reverse side which is dark! Would it be a good idea to weave with the dark side up so you can catch mistakes easier?

Jennifer

PS I like the saving shed thread (say that 3 times fast!) now that I understand where it goes! 

 

jordanj (not verified)

Funny about you not able to grasp the plain pebble weave on the sides.  The plain bit was totally done out of ignorance and the desire to keep things simple while I focus on the bird pattern. Next time I want to add a simple "wave" pattern to that area.

Thanks for the tip on "trusting" the threads to do the right thing. I'll try that today. I'm quite sure there are no warp threads crossed.

I have room for about 4 more birds on this sample piece, then I'll be ready my "real" project of a 3.5" multi-bird band. 

Jennifer

jeanne (not verified)

I just love the colors!

This is what i did to keep my Inklette from skittering. The first thing was to simply reverse the bottom piece so that I could clamp it down without the clamp getting in the way. That was great, but then I wanted to be able to sit with it on my lap. So I got a nice sheet of maple from the woodworking store and cut it to the size of the length of the loom, and screwed that to the bottom piece. It's now heavy enough to set on the table and it won't move about too much. But it's still light enough to carry around easily. And it's easier to get my fingers in to warp the bottom pegs.

.The band is a Celtic knot in basketweave background. Need to finish this and get a Pebble weave on there!

Jeanne