weaversouth (not verified)

Having done a workshop with Joan Griffen using those lovely little pipe looms, I can vouch for the fact that they are great tapestry looms.  I am blessed with one with all the "bells and whistles" but I'd use a pipe loom anytime. 

Bonnie Datta (not verified)

I use wool warp exclusively, as it's traditional in Navajo weaving and necessary for saddle blankets which I make lots of.  It's not easy to find, but I recently got a nice big spool at Espanola Valley Fiber Arts Center in NM, (505) 747-3577, evfac.org, [email protected].  It was manufactured by Clasgens I think, and they have other outlets as well.

Bonnie.

 

mirrixlooms (not verified)

You want your loom to be really strong and to be able to provide tons of tension. The option for a variety of warp setts is important. A loom that stands firmly upright is key unless you want to put it in your lap. Portability is important for workshops. But basically, you want it to be way over engineered for your use so that it does not bend or warp and so that it can provide extreme tension. Oh, and a shedding device is key. Having to hand pick warps to make a shed can get really tedious. An easily operated shedding device makes tapestry weaving so much easier

tien (not verified)

I use the Warping Wheel, and really love it.  You can wind with multiple threads at a time to make the process faster, and you don't need to wind all those bobbins beforehand!  It's also a lot quicker for me since I tend to use a lot of colors in a single warp (up to 30 colors), and change colors frequently across the width of the warp, which doesn't mix well with the spool-rack-and-bobbins method.  You get more thread-by-thread control with the warping wheel.

That said, my understanding is that the warping wheel does not do well with really long warps (though I put on and wove off a 22-yard warp of fine silk thread with no problems at all) and that for wide warps the sectional warping may be faster.

But I love my warping wheel, and recommend it highly.

Tien

jordanj (not verified)

 Tien

Thanks for your input. That's a pretty strong recommendation!

Jennifer

 

jordanj (not verified)

 Deb and Laura,

You both have good points and another consideration is space. I am guessing that one needs a lot of free space behind the back beam. Can you tell me how much? I watched the video on the AVL web site and it seems you can set the reed at an angle, so maybe the wheel doesn't have to be totally perpendicular to the beam. Is the wheel about 6-7 feet wide (or would that be "long")?

Thanks to all for your input. 

Jennifer

tien (not verified)

The wheel needs to be perpendicular to the beam, but the good news is that it is "only" 42" wide, and 20" across (at the base).  So it's about 3.5 feet wide.

You need space behind the beam for a spool rack, too, so the packages can reel off smoothly - in fact, you probably need even more space than with a warping wheel.

Tien

jordanj (not verified)

 Ah well, 42 inches is nothing at all! And for me, I think this won't be hard on my shoulders (not nearly as bad as the fly shuttle, I'm sure!).

You all have been convinced me that the warping wheel is the way to go and so I have committed to buying a used one - it is a model with spools (instead of blocks) and looks to be in good shape. It will take 10 days or so to ship, so I had better hurry up and get my current project finished up and off the loom!

Thanks again to all for the quick responses!

Jennifer

jordanj (not verified)

 Thanks Deb. There are some great pointers there.

This wheel deal that I'm getting does not include a cross maker. Is it recommended to have one? If you don't make a cross, when threading ,does it work to just use the yarns in the order they come off the tape? I assume with this method you'd end up with some crossed threads, but as they would all be within an inch (or two) of each other, I would think that wouldn't matter. But I have never worked with threads finer than 10/2, so I don't know much!

Jennifer

tien (not verified)

I was advised to get a cross maker for working  with very fine warps, so I did, and had no problems with the warping.  I haven't tried fine warps without a crossmaker, but when I did one or two pieces with slightly less-fine warps, I found I had trouble keeping yarns in the correct order, some would always come loose from the tape and "float" around so I had no idea where in the bout they belonged.

If you are doing fine threads, then I would recommend the crossmaker - fine threads are more likely to tangle and less strong against abrasion/tangles than thicker ones.

Hope that helps!

Tien