claudia (not verified)

There is an empty hole in Heddle #2, no empty slot.  If you follow the diagram Susan did you should be okay.  There are no empty holes in Heddle #1.  This diagram is drawn as if you are looking from the front of the loom to the back.


Heddle #2 is on the top of the diagram and Heddle #1 is at the bottom.

Hope that helps,
Claudia

kellytwo (not verified)

I understand the diagram okay, but it's the start of the repeat that I can't visualize. When the repeat starts on the left of the diagram, the red goes in the next slot of heddle 2, and if it goes in the next empty hole, (the empty one shown on the diagram), it seems that the diamond will be going the wrong way, like it's repeating the half that was just done instead of starting a new one.

momframer1 (not verified)

I know what your concerns are, because I had the same ones. I do not know why or how but it does work.  Susan told me to leave no hole or slot in heddle #1 empty, so that is what I did....and it worked.

claudia (not verified)

I see how that can be confusing.  When you do the repeat, the first thread of the repeat is in the next slot on heddle 2 and the next hole on heddle 1.  As you go along, there will be a slight jog that forms between heddles 2 and 1.  I believe it's unavoidable to get the twill pattern to work.

Claudia

momframer1 (not verified)

Please don't be embarrassed!!!  I am so grateful for all your help on this weaving project. I think I learned so much more doing this because of a few tiny bumps in the road, that made me have to think through all the "whys".

kellytwo (not verified)

Thank you Susan. I can't wait to continue in the morning.

claudia (not verified)

Well, mine is slightly crooked between the two heddles but the pattern is showing up nicely so I don't think I'll change it now.  I hope to have enough warp for 2 scarves and will but the first one off when I finish and fix the threading for the second scarf.

Thanks Susan for straightening us out, in so many ways : )

Claudia

claudia (not verified)

I just reread your post and am now a bit confused.  Do we skip 1 hole in heddle 2 when the diamond changes direction and one hole in heddle 1 when the repeat starts over?  Your note seems to indicate we skip 2 holes in heddle 2 and 1 hole in heddle 1. 

I just want to get it straight for when I re-thread after this scarf.

Thanks,
Claudia

claudia (not verified)

I just reread your post and am now a bit confused.  Do we skip 1 hole in heddle 2 when the diamond changes direction and one hole in heddle 1 when the repeat starts over?  Your note seems to indicate we skip 2 holes in heddle 2 and 1 hole in heddle 1. 

I just want to get it straight for when I re-thread after this scarf.

Thanks,
Claudia

mmorse (not verified)

After an evening of warping, I have about 3 inches of not-quite-diamond twill and one perfect one-inch example. (My ability to count things fades after 10 p.m.) With more practice at the "treadling," it should improve. Thanks to Susan--the diagram was very helpful. My not-quite-diamond made me curious about what other patterns one could get with this tie-up, and I found this online.

Sorry for the Microsoft junk. I don't know how to get rid of it.


http://www.ktu.lt/lt/mokslas/zurnalai/medz/medz0-88/17%20Textile...(pp.79-82).pdf