SteveL (not verified)

I'm likely confused with all the dents, ends, and wraps, and setts...

 

If a given warp was 12 wraps per inch, I thought the "rule of thumb" would suggest a starting sett of  1/2 the wpi or 6 in this case - which translates to a 6 dent heddle?  Obviously, you can work up or down from this point depending on the desired cloth...

I confess this is the single most perplexing choice I make when starting a project, and enjoy clairification when ever it's available!

Steve

claudia (not verified)

Hi Steve,

How to calculate sett is one the great debates in weaving.  We have a Sett calculator in the Resources section that is very helpful.  I tend to rely on calculating my sett using the chart in Peggy Osterkamp's book which gives you choices based on the fabric you are weaving and the diameter of the yarn which is part of what happens when you wrap it and divide in half for plain weave.  She also has a complex method for calculating sett which can be found here. 

I often refer to a sett chart in any of the basic weaving books or Handwoven has a Master Yarn Chart which I printed a long time ago and sometimes I refer to that.  You can find it here.  My goal is to find the sett of the yarn I am using or if I am using a knitting or crochet yarn, I will figure out the yards per pound and look for a yarn that is similar in the number of ypp on a chart and base my sett on that.

Kurt and Sharon Alderman and I had a discussion about this on Weavolution here and there is another here.  That may help.

Now you have enough resource for complete confusion.  Lately, I have been using Sharon Alderman's formula.

Claudia

Caroline (not verified)

I ran the two threads as one thread, so it took half the time to direct warp, then by going in from the back of the heddle instead of the front I could clearly see where the warps had to go. I was able to sort any potential tangles at the back beam as well. But whatever works for you! its my least favourite part of weaving, so anything that makes it quick and efficient gets my vote.

The running 2 threads as one is something I learned when warping up for a WAL in the backstrap group, and it works particularly well with a rigid heddle loom and direct warping.

GinWeaver (not verified)

Steve, thank you for posting your suggestions on warping.

I started the direct warping process last night, and it seems like everything is where it should be. Tonight I'm going to tackle moving the ends around, and hopefully be on my way.

Thanks again!

Looking forward to seeing everyone's projects. If this first one is a success, I really want to try the Magic Steps log cabin from Weavezine: http://weavezine.com/summer2008/wz_su08_EricadeRuiter.php

Dream Big!!

Kurt Pippin (not verified)

I'd like a tad more light/dark contrast, but yes, blue and green look beautiful together. Your blue looks quite cyan on my monitor, and the green is pushing toward yellow.

Damn those frayed warps!

Pip

djfiberarts (not verified)

Ok so they are very tropical colors, lol! I am having the same problem as far as sett. I am using yarns that are a bit under 7.5 epi (the only heddle I have right now) and mine is looking "lacy". I'll post a pic when I move back into my office in a few minutes.

DJ

djfiberarts (not verified)

  This is how it looked when I first started. It's looking more "with it" as I progress. I'm hoping that it fulls when I wet finish it. The colors are more subtle, but I'm liking the way it's coming along. It's just a practice piece and I'm finding I really like doing the log cabin thing. It's relaxing and keeps you in the moment.

DJ

francorios (not verified)

Those look like neat yarns.

I think you could re-thread the heddle in the manner described by Steve to correct the pattern for weaving without having to take any yarn off the beam.

When you start weaving, be sure you straighten out any crossed threads on the back beam every time you advance the cloth.

Have a good day!

claudia (not verified)

Ok, I gave in.  I rethreaded everything, a second time, and wove it, a second time.  It looked awful.  I couldn't even bear to take pictures.  I took out the warping peg, found a white yarn that is very similar to the dark blue and, with the warp on the back beam I "direct" warped the new yarn. 

I took one taupe yarn out and replaced it with the white, walked back to the peg, wound it around and came back and replace the next taupe thread.  It took about an hour.  Then, I wound the entire warp onto the front beam, cut the taupe yarn off the back beam.  Retied the navy and white yarn to the back beam and, with the help from a friend, wound the warp back onto the back beam with paper between the layers.  Now, I am retensioning the yarn on the front apron rod, or whatever it's called, and then I'll weave for the third time.

Hopefully, since I am into cliches lately, the third time will be the charm.  Ugh.  This was not in the plans but now, at least, it is done.  The warp looks better and I hope the results are improved.  Pictures to follow soon.

Claudia

claudia (not verified)

Here it is.  Attempt #3, not sure I am on the right track yet. 

HELP!  I have done this at least 6 times before on my 4-shaft loom and it looked great.  I just don't see where I have gone astray here.  I must be missing something.

log cabin experiment

so, I am following "tromp as writ" weaving the same as I threaded.

D-L-D-L  L-D-L-D  D-L-D-L  L-D-L-D

    A              B            A            B

But the blocks do not show up as nicely as they do on Franco's piece.

Perhaps I should double the weaving and do this:

D-D-L-L-D-D-L-L      L-L-D-D-L-L-D-D-

           A                              B

I'm open to suggestions and ideas.  Clearly, this is not producing the web I expected.

Claudia