francorios (not verified)

Yes, when I say flat shed stick or pickup, it used like a sword/beater.

Leave the shed stick (round one) in place, use the sword for opening the shed.

For narrow bands, a wood ruler works well. Use sandpaper or emory board to shape the end into a thin flat wedge shape to go through a narrow shed prior to opening.

Have a good day!

francorios (not verified)

(Click on pic for larger view)
These are the yarns (Paton's Classic Wool, 100% wool worsted yarn) I have to choose from for the Log Cabin Weavealong on Weavolution.com this weekend. Black, White, Red, Purple. I chose red/white for best contrast so I can see what I'm doing.




This is 30 pairs of warp (60 ends) on 10 dent heddle for 6" scarf on the Cricket loom.



After winding the warp, I have to sort out the pairs according to the chart I found on the Schact newsletter at this site
http://www.schachtspindle.com/Newsletters/Newsletter2005Spring.htm




First an inch of waste yarn to set the spacing, then two shuttles of red/white, I duplicate pattern I used to warp up. Switch is every five pairs, but still plain weave. I overlap/twine the edges where the colors cross.


OOOPS!! Missed the change. Unweave - do over!


That's better! More later!

  *Warning: My wool yarn is sticking, be sure to clear shed every time!*

Have a good day!  

Caroline (not verified)

Yup! You get a scarf with designer curves styled to fit a barbie doll.

Log cabin is a balanced weave The threads need to go around each other. If you pull the weft snug the fabric becomes more warp-faced and waisted. Its something you have to work out for yourself, and most people bubble or arc the weft so it can move and settle into place when its fulled.

Manicgirl (not verified)

I set up my loom yesterday, and I choose a wool yarn in dark red and brown. The contrast is, shall we say, very small... It looks great, when I catch it at the right angle, but otherwise it doesn't look like much at all. Also, I have a very loose set for this yarn, as I plan to full it somewhat when it's finished.

I realise now that it would have been better to chose a yarn with more contrast, but I'll do that for my next log cabin project.

 

I threaded LDLDLD DLDLDL LDLDLD. I'll have to read through, and really understand, Claudias first post, because my pattern is not symmetrical. There is a lot to learn! And I really appreciate you being so thorough Claudia, thanks!

 

Caroline (not verified)

Well, I don't, but my selvedges are not brilliant.  Like many people I have one edge thats acceptable, and one that looks a bit scruffy and undulates gently, so if I concentrate really hard, I improve the bad edge and lose the good one, grrrr!  Practice, practice! I can always crochet around the edge of a scarf anyway as a trim and hide the whoopsies.

francorios (not verified)

Laverne and Caroline,

I'm finding the edge to be problematic since there is two shuttles in play and two wefts to go over the outer warp. It's almost like twining the edges, but when you change the pattern you throw the color you did the last time again and that throws off the twining. I'm hoping the wearer will just be dumb struck by the clever pattern and not notice the bumpy edge. But I am trying to make it look consistent with the direction of twining/overlap.

ETA: I am also measuring the width with a ruler/scale as I weave. That extra room is to counter the draw-in from the last shot of the shuttle. I'm trying very hard to keep at 6 inch width. If I pull it snug, it tends to draw in. I think the other issue is that the yarn measures 12 wraps per inch, the heddle measures 10 per inch. There SHOULD be some wiggle room in there for the yarn for a plainweave.

Manicgirl,

The pattern is NOT symmetrical as I think of symmetry. As I weavealong it's like dancing to a count of five, one two three four FIVE! and FIVE! one two three four...

I printed the page from the Schacht newsletter, http://www.schachtspindle.com/Newsletters/Newsletter2005Spring.htm 

Because it has a very nice little chart and I had it sitting next to the loom while I warped. It was a big help.

When I get done with this red/white and I understand the pattern better, I will weave the black/purple together because I think I would look good when the light hits it at the right angle.

I hope that helps.

Have a good day!

francorios (not verified)

Did anyone notice the skeins of yarn? I bought those at Goodwill for 99 cents each!  Goodwill is a second hand thrift store.

I've been saving these 100% wool  yarns for weaving "real" scarves!

Have a good day!

Caroline (not verified)

Goodwill looks to be really good! I have bought weaving books from Goodwill in Chicago; even with postage its cheaper than buying them here!

I've occasionally found spinning fibres, and once found some handspun I could use, but the finds are few and far between at my local thrift shop. The manageress watches Antiques Roadshow and The Collectors ( an aussie show on collecting) and prices everything as if its in mint condition, and at its insurance value, grrrrrr! Then wonders why it doesn't sell. I love it when I find rare antiques or bits of gold and silver they have missed, hehe! The really valuable items get removed at head office, but sometimes something slips through.

I haven't got as far as warping up yet, I'm spinning furiously and carding batts, but I'm not looking forward to the selvedges one little bit. Did you double the yarn in your selvedges? I have found that makes a difference, so perhaps it would help here with twining the two wefts.

francorios (not verified)

Nope, did not double the yarn on my edges. It would be kind of difficult because I'd have to have slots on each edge with a double thread, and the pattern seems to rely on pairs.

I have enough to pay attention to as it is.

But it is coming along.

Have a good day!

francorios (not verified)


Here is a picture of the crossed threads on the back beam after advancing the cloth.
(click picture for larger view)
This is because of the thread sorting I did after direct warping the loom. The crossed threads above the back beam (upper dowel) will prevent a clear shed when weaving.



Here is the back beam after straightening the threads so none are crossed over each other. Below the beam doesn't matter until I advance the warp again and will straighten all again. A crochet hook is very handy for this. Don't keep the warp super tight while doing this. Have your heddle in neutral position. My loom is on a folding wooden table (tv tray table) and easy to turn around.


Here is some detail of the weft splicing. I over lap the weft two inches to blend in with the pattern. I also try to splice on a pattern change. The yarns sticking up will be cut off after wet finishing.

Have a good day!