Caroline (not verified)

Its the portability that makes spindling very productive. I am as prolific on my spindle as I am on my wheel, because its something I can pick up and put down, and produce the same yarn. I can take it with me as I walk, spin at the computer, in front of the TV, and at the doctors. I cannot do that with my wheel, and when I use my wheel I tend to set aside a period of time to use it, so it gets less use than my spindles.

Also if I am trying a new fibre, or to produce a different yarn, I can check my progrees easily on a spindle, and its easy to correct what I have done, either adding more, or less twist, as I go. Wheels do not provide the same control over what you are doing. They can require constant attention to tension control. I may produce more yarn in a set period with a wheel, but I can spindle at odd moments, so at the end of the week, my spindle output is the greater.

Aunt Janet (not verified)

Yes, all that Caroline said. Abby is pretty amazing, I think.  looking at the Spin-Off article, excerpt from her book, she is spinning in a manner that I haven't tried.  She states spinning in that method can rival wheel spinning for speed.  I am willing to give it a try.  I carry a spindle and fiber everywhere I go, just in case.

I did forget that I do have a very speedy wheel.  It is my Alden Amos Bull Pup Charka Wheel.  It is fast, but I haven't used it enough to be proficient with it.  My yarn tends to be a little bit thick and thin.  I'll get it out and give it some practice.

Caroline (not verified)

I think the charkha is a whole different thing to a regular flyer wheel. I have the Babe Liten Spindel, and it will be ideal for spinning warp yarn. Because you turn the wheel and control the speed at which you turn it, quality and quantity control is almost as good as a spindle, once you get into a rhythm. The Babe is not as fast as other charkhas. I think the highest ratio is something like 33:1, which makes it ideal for my purposes as I can still see what I'm doing and catch any whoopsies before they disappear.

I learned to use it spinning alpaca and found a ball of it the other week - after 5 years it was still a tightly spun single! I'm not so keen on spinning cotton, although I have some on a tahkli at the moment, and have found a supply of coloured cotton batts at one of my local shops.

I'm in two minds about Abby's book. Its on my wish-list at amazon, but there are a few books in front of it that better justify the cost of shipping, and the price over here is through the roof of course. I haven't read enough comments about it to tell whether all the hype is real, or just spin - no pun intended.

Aunt Janet, do you thwack your skeins after you have washed them? Does this even the twist out more on tightly spun yarn?

Aunt Janet (not verified)

No, I don't twhack my yarns unless I'm trying to produce a felted yarn.  I haven't even been wet finishing my yarns for backstrap weaving.  There is enough tension on the yarn, that it won't change if you are going to wash the item later.   I've never experienced evening out of twist after spinning.  Have you?  I'm working on even yarn at the wheel.  It doesn't always happen, but that is what I try to do. 

Caroline (not verified)

Up to now i have been spinning for knitting yarn so softness and low twist have been important. I do thwack my yarns; its how I've always done it and I see a difference in how the yarn blooms; it also seems to even out, but that could be because there is room for the twist to even out anyway. 

I tend to spin semi worsted on my wheel and my spindles, but generally use a long draw and spin from the fold with the charkha. How even my yarns are depends on how well I have prepared the fibres and whether they have been combed, flicked or carded - I find its easier to get a consistently  even yarn using spindles. But if I overtwist I get backspin on my top whorl spindles, grrrrr!  I'm working on it as I'm determined I should be able to pick up almost any of my spindles and spin a warp yarn, instead of having to reserve my heavier bottom whorl spindles for the job. So it sounds as if I am trying to achieve similar results to you.

At the moment I'm spinning sari silks, for use as tapestry weft. This needs to be highly twisted to hold together, but I keep it as lightly twisted as I dare, and don't wash the yarn - I use it straight off the spindle. I have a few strong fleece in my stash, Romney and Border Leicester as well as English Leicester, as well as Alpaca in various colours, and Llama which I will tackle on the charkha so I don't have to worry about under-spinning. I don't like cotton, so I'm not interested in spinning cotton warp when I can get cotton  quite easily locally. I have also been lucky enough to get hold of some silk for weaving so there might be an alpaca/silk scarf in my future, :-)!

Aunt Janet (not verified)

 My spindles tend to be a pointy stick and a whorl.  No hook please.  I spin off the point, with the point up and supported by the tension of the yarn only.  Akha style, I believe.  I am going to try Abby's method.  I have in mind a spindle to shuttle trick.  I believe the Bosworth Charka has this ability, to take the spindle and drop it into a boat shuttle.  That's what I want to do with my little bead spindles.  I often use double pointed knitting needles for shafts because they are already made, quite straight and smooth.  So, the idea is to remove the bead, drop the knitting needle into the boat and weave away, or store on  needle until needed.  I can move the bead to another needle or dowel.

 I got a lovely little clay bead whorl on etsy the other day.  It has nice balance, is light weight enough for laceweight, and holds a spin for a nice long time.  I think the vendor was called "beadhead"  Once I started looking for bead disks, I was lost.  Of course the one I liked best was $200 or something like that.  I bought the $6 one.  When i'm at the Conference of Northern California Handweavers this coming April I'll be shopping for a shuttle that will do this for me.  If I don't find one, I'll get one of the makers to build one or two for me.

I sure agree with you on fiber prep.  the other very important factor is starting out with great fiber.  Makes a terrific difference.  

Alpaca silk scarf sounds like an excellent choice!

jeannine (not verified)

hi,here are some pictures of my spinning results; I don't know much about spinning terms ,i just spin yarn with my homemade dropspindle .I'll need to make a sample to see if i can use it for backstrapweaving.though the yarn is not as fluffy as the picture shows (close-up).

more on how i prepared the yarn:jskunstweven.spaces.live.com/blog/cns!9F13A829247F7571!189.entry

here are some of the yarns i made:

and here  is a view of the tweed on a ruler:

what do you think about it?

please  explain: thwack??

Caroline (not verified)

"Thwack" is the sound we make when we take a wet skein of yarn and hit it against something to separate the strands - its not in the dictionary, I'm sorry, but it does describe exactly what we do. Many spinners don't bother with this, but as I do spin with Merino, and have a very loose twist in my knitting yarns, it slightly felts the fibres together so the whole thing does not fall to pieces when I handle it.

"Worsted" describes the process of spinning a very straight compact yarn, that is generally less soft than a woolen spun yarn. The fibres are combed, not carded, so they are straight and in a line, and they are spun with pinching the tops to prevent the twist into the drafting area, and using one hand to smooth the yarn when you let the twist travel up. There is little air in this sort of yarn, and its stronger, and better for weaving.

"Woolen" spinning is where the fibres are carded and are all jumbled upand full of air.  The spinner allows the twist to travel up the drafted fibres, and moves the drafting hand back before allowing the yarn to be drawn in to the orifice, on a wheel, or winds on on a spindle.This is called a long draw.  Ideal for soft lofty yarns for knitting and crochet, and can be used for weft.

I hope this explains things a bit better. Most spinners spin sort of halfway between the two styles, but for weaving I will be aiming at doing worsted spinning so I can use the yarn for warp. It should stand up to the tension better, and not get sticky and abrade in the heddles.

Your method looks very similar to mine, a sort of worsted, so will produce a weaving yarn once it has enough twist in it, and doesn't rub. I have also used hair conditioner diluted with water as a size, and it works well in stopping the yarn from rubbing.

Aunt Janet (not verified)

Nice yarns, Jeanine!  They look very consistent and the colors are just the kind I like to wear, subtle and tweedy.  It will be nice to see what you weave with them.  

 

jeannine (not verified)

thank you for explaining this for me.yes i think i do something halfway between .i card the wool but then i try to keep the fibers as paralel as possibel;I also have spun merino comb band and indeed that was less fluffy.