Caroline (not verified)

hi Kath, what a fantastic opportunity! Please take mercy on those of us who couldn't get there, and pass on some of what you have learned, when you have properly processed it all of course, lol!

Can you tell how envious I am?


kathkol (not verified)

 Here are the photos Beth took at our class over the weekend.  Scroll down a bit in this entry.

threesheeps.blogspot.com/2009/07/this-past-week-was-veryveryvery-busy.html  

I started going back over the information today.  I want to practice more on each of the patterns we worked on in class.  I also want to set up another loom (wind the warp and tie the heddles) while it is still fresh in my mind.  More soon!  

daisey27 (not verified)

I can't believe how much you all learnt in one weekend.  Amazing work. 

Karina

Caroline (not verified)

I think my skin is bright green! Lucky, lucky girl!

 You improved soooo quickly and that is impressive!

Look forward to hearing more about this!

kathkol (not verified)

 I am practicing a bit each day!  An hour or two at the loom in one stretch is much easier on my body than all day. Thanks for asking, Laverne!

I am comfortable with the patterns we did in class and can work them from memory/reading what I have already woven. My concentration now is on even tension and selvedges.  Practice, practice, practice! 

I have started spinning (on a drop spindle) alpaca for a backstrap project.  I am not sure what the item will be, and I do not want to start it until I have improved the tension issues!

This should improve my spindle-spinning skills too (I am much more comfortable at the wheel). The yarns used in the items Abby brought to show us were v-e-r-y tightly spun.  She said you could be out in the rain for three or four hours in a manta and not get wet through.  The highly twisted yarn makes the garment almost waterproof!  

I have cocoa brown, almost black and cream fiber.  I will probably dye some of the cream with my natural dyes.  I learned that the Andean weavers dye the yarn as a single.  We hypothesized that that was because yarn is easier to dye yarn than fiber, and, with the tight twist, it would be hard to get the dye to permeate the plied yarn.  The yarns we saw in the samples were two ply.

 

kathkol (not verified)

 Thanks Laverne.  I admired those projects when you first posted them.  

riversidefiberarts (not verified)

Hi Deb,

When I'm using my warping wheel to do sectional warping, I've found that the easiest way to keep the warp straight and flat is this: 

I put the cap on the little raddle with rubber bands (the little springs that originally came with it are long gone and were pretty useless anyway).  Then I cut the warp at the clip and put a slip knot in both ends.  The cross end slips over one of the pegs of the cross-holder just to hold it out of the way til I get that far. 

Then I take the raddle out of its holder and just let it hang free instead of putting it in the slot at the front of the wheel.  The rubber bands on each end secure the cap to the raddle.    Next I attach the knotted end of the warp to the cord for the next section to be wound and I wind on by turning the beam with one hand while holding the warp taut with the other.  The raddle is just suspended in mid air between my two hands and provides just the right amount of weight to keep the tension nice and even as I wind it on.

Before I started doing it this way, I found that at least once (and sometimes more often) with every new warp, no matter how tightly  I secured the top of the raddle to the front of the warping wheel, at least a few and usually many warp threads would 'jump' out of their assigned dent into the ones near by resulting in tangles and lots of very unladylike language.

By letting the raddle just hang freely, I find that the section winds on quickly and smoothly. 

Cheers,

Deborah H. 

jordanj (not verified)

 When tying off the cross, how many ties do you make? I have been tying off just the center of the cross and am wondering if it will be hard to find the two "halves" when it comes time to put in the lease sticks.

Thanks!

Jennifer

jordanj (not verified)

 Deb - thanks for your input. I am warping directly from the wheel onto the sectional beam and I just felt that the center tie was not enough. However, putting four on and then taking the off, seems like a lot of work for just an inch of warp, so that is why I asked.  Maybe we should invent a clip or something that would be easy on/off. Not much of a market though, I suppose!

 

jordanj (not verified)

 Deb - thanks for your input. I am warping directly from the wheel onto the sectional beam and I just felt that the center tie was not enough. However, putting four on and then taking the off, seems like a lot of work for just an inch of warp, so that is why I asked.  Maybe we should invent a clip or something that would be easy on/off. Not much of a market though, I suppose!