choosing reeds

Hi weavolution friends, You all are amazing - there is so much information and so much I have to learn! As I've written before, my loom is countermarch loom is quite old and the Gowdy reeds that came with it, a 6 dent and a 15 dent, are sturdy, but considerably rusty. I am attempting to fix them, but will likely need new reeds. Based on your experience (I am a total novice), can anyone suggest which one or two reeds a beginner should invest in (how many dents)? Thanks a bunch!


Posted on Wed, 02/25/2015 - 00:53

I have found that the two that I use most are 10 and 12, but 8 is nice is you want to make rugs.  It depends on what you think you  might want to weave.

Posted on Wed, 02/25/2015 - 02:16

If you're going to get two, I would get a ten and either an eight or a twelve.  With those two, you can easily get many possible combinations.  Personally, I would go for the eight since it's what I use for chenille scarves and rag rugs, but if you tend to like finer threads and be a towel person, you might be better off with the twelve.

Posted on Wed, 02/25/2015 - 03:01

I have been weaving for about a year now and have only used a 12 dent reed.  However, there are times I wish that I had that 10 dent reed.  My loom came with an 8 dent and a 12 dent reed.  Someday, I will get that 10 dent reed. Its hard to decide and i wish you the best of luck in your decision.



Posted on Sun, 10/27/2019 - 15:30

I've got a few hand-me-down reeds that came with my looms, so I've never actually bought a reed. Now I want to expand my collection, but am not sure which kind to buy. I would rather spend $50 for a good reed that will outlive me than $30 for a reed that won't.

NOTE: these are for my 15" table loom, which is why the prices above are lower than they would be for a meter wide floor loom.


Posted on Fri, 01/03/2020 - 21:30

  • I've never paid any attention to reed height.  Most of my reeds cane with looms, and they are what they are.  Some are 4", some 5", a few are taller.  I use them interchangably in a wide variety of looms and have never had issues with the height of the reed limiting the shed.  If you have a rug loom, with a very large shed that you want to use rug shuttles with, it would be an issue, I suppose.