I have a Glimakra Standard. I'm want to warp for more than one project. Does anyone know how much warp I can load on the warp beam. Want to make the most of the warp thread. Rugs will be 48" long and want to get as many rugs as I can and have the least amount of waste. Not asking for calculations for rugs, but only the total length that the loom can handle. Or maybe the question is , how much will the fabric beam hold? Thanks...................Steve
You can beam warp on your loom until the warp touches the back beam - however much that is.
Then as you weave the warp off, you cut off every time the buildup on the cloth beam becomes awkward.
Steve, do you have a plain beam or a sectional beam?
One factor is how much the warp beam can hold, which depends on the type of beam and also the thickness of the warp yarn. The other factor is how long a warp you can handle without problems. Generally a sectional beam and warping from spools is recommended for warps over 20 to 25 yards because a warping reel or warping board might not hold more than that. Are you using a linen rug warp? Cotton carpet warp? What is going between the layers of warp if you are winding onto a plain beam?
You are right that it saves time and materials to use a long warp. If you have not tried it before, I suggest starting with something around 15 to 20 yards long and see if this is good with your current warping methods.
Bonnie Inouye
Sara and Bonnie, Thank you very much for the info. Makes sense. I have a plain beam with the sticks to put into the wrap..............Steve.
Sara and Bonnie, Thank you very much for the info. Makes sense. I have a plain beam with the sticks to put into the wrap..............Steve.
Another question. What is the warp thread you prefer, 100%cotton or poly/cotton blend? I'm getting ready to order a very large amount and want to use the best for making rag rugs............Steve
12 or 15 ply Seine twine is the best. Look around at weaving suppliers.
